Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Nope.One is a 3040 the other a 3540

3040 is about a 600hp turbo

3540 up to about 750hp depending on housings.

Wouldnt go smaller than an .82 on a RB30

3040's come in 500, 550, 600 depending on the compressor wheel chosen (different part number) :)

I had a 600hp one, others i know have a 500hp one

I agree 150%, perfect turbo for the 25/30 still giving great response with good peak and a stonking midrange

yup im agreeded guys. thanks for every ones input. was of great help.

now its 2 grand investment time lol

I dont think you can go wrong with anything around the GT35 range (either a GT3540 or something slightly smaller, GT3240), they will easily give you the power you want (rated around 600-700HP) and beyond and being a 3L this gives you the displacement to spool it up quickly.

Quick edit: Just noticed you have 500cc injectors, are they actually 500cc or nismo 555cc injectors? Either way, if you want to go much over 300, say 330ish, id probably recommend 740cc injectors just so you arent running the 500cc on such a high duty cycle.

i'd have to agree on both, especialy running a 30 block

im running twin garretts 35/40 one hiflowed the other standard, and bosh 740cc injectors on a low impedance.

rb30/26dett head.

My 2 cets worth, GT35/40 heaps of them around as they are the ones on BA Falcons, proven to make obscene power. I was going to put on of these on my VLT, i think they rock just just my opinion tho

hmm then gt3540 is whats on Eastons r31 black pearl drift car... cause i know he is running an xr6 turbo...

i know that things goes hard too . it seems most ppl are recomending very similar turbo

yer i will be using bosch injectors as my bro ownes the dealer down here

ok im guessing these are essentially the same turbo with different exhaust housing sizes???

one is .82 and one is .61???

will the .82 mean more lag?????

hey mate, just to clarify for you the 3540 and 3582 are the same thing. Steer clear of the xr6 turbo, boost control is a nightmare with them i found

Edited by DCIEVE
hey mate, just to clarify for you the 3540 and 3582 are the same thing. Steer clear of the xr6 turbo, boost control is a nightmare with them i found

Thanks DCIEVE

Yes i have worked out they are the same thing lol. too bad no one else could put it so simply lol.

Spoke to "un named" seller today and i can get trade price of $1600 for a new gt3540 with the .82 exhaust housing...

Hows this price???

need to get manifold too, he quoted 900 which is a bit excessive so ill keep looking.

peoples thoughts...???

are we talking internal gate or external?

i asume ext.

what brand was the manifold?

yes externally gated.

unsure on the mainfold brand!

having a look on ebay and stuff but looks like home made crap. ill find a decent one for a good price if i persist :wub:

HKS 3037 or TO4Z...

wtf?

how can u recommend a HKS GT3037 and then go and recommend a t04z

both turbos are no where near each other so how can u recommend one and then the other??

like if u said GT35R and t04z its abit more understandable

IMO

for a Rb30 / 25 setup and aiming for 300rwkw i would recommend the GT35 with .82 exhaust housing

this would be a very responsive setup

DO NOT go any smaller then a .82 exhaust housing on a 3L engine!

Edited by STR8E180
  • 2 weeks later...
Well you wouldn't promote Garrett now would you?

Your aware of your warning, if your just here to plug your parts, ill send you on a holiday

LOL +1

Steer clear of the xr6 turbo, boost control is a nightmare with them i found

Yup as i have heard also. This being due to internal gate i do believe?

Ive gone externally gated.

$1600 aint bad. I was looking at paying $2200 back a couple of years ago, that was for an internally gated one.

Yup $2200 is still about right for retail but i got a work account with the peeps im goin through :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...