Jump to content
SAU Community

Recommended Posts

  • 5 months later...
  • Replies 75
  • Created
  • Last Reply

Top Posters In This Topic

In regards to what JiVE said:

"And if your after the 'flutter' sound this can also be acheived through the stock bov. Just get a POD and pull the vacum hose out of the BOV. Make sure you block it off real good however, or you will stall."

Have any of you guys actually done that? And what is it about that that would flutter? I've heard of the fluttering before, but i don't know what causes it.

And what sort of effect would this have on driving and safety of my engine and parts?

In regards to what JiVE said:

"And if your after the 'flutter' sound this can also be acheived through the stock bov. Just get a POD and pull the vacum hose out of the BOV. Make sure you block it off real good however, or you will stall."

Is that safe? isnt that making the BOV useless?

If you want the pppsssshhh sound just install a pod filter. Some are quiet loud and they wont cause your car to stall & back fire... (Make sure you get some sort of cold air box with it though...)

Thank you all for your responses.

Scanning 500+ pages of the manual and converting to pdf...would take a while. I want to scan it anyway so I don't get it dirty when working on my new girl ;)

I know some of you think that a bov is surpurfulous, I don't want to get in trouble with the cops either, I just love the sound :D I have enough dramas with the cops in my N13 pulsar GL :cheers:

Looked at ROH 17" Fury wheels for my car today. $2300 inc tyres. Gees, things have become expensive, it's been about 5 years since I've bought stuff like this, I am really out of the loop.

When i Installed my Blitz BOV i had to take off the stock BOV and replace it with a metal plate to seal off the hole. I did the test without the BOV hooked up and the Flutter sounds great.!!

I also found with the adjustmant screw on the Blitz, at low boost i could make the same sound.

Unsure if it will work if you just unhook the vacume line... as there is a small hole in the stock BOV that bleeds pressure off..... No idea why....

I just took off my stock rb25det bov last night to replace it with GFB Mach 1

its gone on no problems, but the recirculating pipe back to turbo, or the rubber tube that covers the old b.o.v so that it goes to airbox is now left open...

i called gfb to get the rubber BUNG to plug it up, but i started car last night, & yea it was idleing fine, but when revved, it started to sound as though it was chugging along,

the bung is being delivered to me today my gfb, but can i still drive to the ervo in it for milk & bread & shit, or THE PLUG MUST BE IN PIPE?

Tight fit.... or should that be "toight fit mate"... anyway

It was similer size to the rubber hose and slotted in, i just did the clamps up real good and tested with bag to see if there was any pressure loss... (none of course)

There's a website that reckons you can modify the stock BOV to be able to handle 30psi without leaking. Not 100% sure if it's the same BOV as the stock one in a Skyline but it looks very similar, maybe you could try the same thing?. Go to http://www.thedodgegarage.com/turbo_bov_mod.html

Find the 'recirculating valve' that will be attached somewhere between your compressor outlet and your throttle body (if your car already has one). The cheapest way to make this vent to atmosphere (pssh) is to:

* disconnect and plug the return hose

* put some type of filter over the "new" outlet on the valve.

Note that with an AFM car, you're now dumping air which your meter(s) have measured...

Regards,

Saliya

  • 6 months later...
Does the GTS25t has its own standard BOV or BPV? Im planning to install a bov after market bov. Is that a good idea?

Hey buddy, your beautiful line already has a highly effective BOV from the factory!!

You'll do well to keep it! (unless your planning some other seriously insane power mods!!). Cops won't hassle you as much either, I guess! ;)

Hey buddy, your beautiful line already has a highly effective BOV from the factory!!

You'll do well to keep it! (unless your planning some other seriously insane power mods!!). Cops won't hassle you as much either, I guess! :)

What i meant was whether the auto uses a BPV or Bov cause i saw em in another thread about it

  • 1 year later...

I am considering to put in a HKS SSQV BOV with the whistle sound.

I'm aware of the fact that it'll attracts cops.

But as long as i drive like a turtle and change gear at RPM 2000 odd, the BOV will not sound (correct me if I'm wrong).

I just like the "whistling" sound from the SSQV. that's y i'm considering to get it.

in terms of running richer, is true. But tuning is all about getting it to run at optimum (correct me if i'm wrong again).

:worship:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...