Jump to content
SAU Community

Recommended Posts

ooooh

5 stud conversion

me thinks s13 bouncy bits and s14a front hubs??

so close, i used s-13 HSD HR coilovers with s-13 hub carriers with 5stud conversion hubs from justjap on the front...

it's only after you buy all the bits that someone tells you you can use s-14 hubs...... :yes:

  • 1 month later...

Lol you thought that guy with the r32 was low..

I'll post some pics of my s13 in a few mins.

So low after clipping the road a couple times while driving through the national park the exhaust dislodged from the cat, only held on by 1 bolt! Sounded like a light plane and went like a truck. :D

YEAAAAAAHH!..

Nice find!..

Sizes?.. Offsets?.. Weight?..

Havent seen many of the 4 stud ones around!.. Nice work!

i took a photo of the sticker

17 x 8.5 +35 (for all four rims)

weight? an amazing ~7.5kg!!

yeah 4 studs are hard to come by, i heard from an unreputable source that only 200 (or was it 2000) sets were made. even then, this set is the 3rd set i've only seen in about 5 years.

Hey this is my NA 34.

Just waiting on a new engine to go in cos i cant handle the lack of power lol but yeh just thought id see what people think.

And i hope the pic works cos im not very good at all the posting stuff.

cimg2016fd8.jpg

i love the paintwork. you coulda done better on the wheels though (more offset). they look tops but the car doesnt feel complete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...