Jump to content
SAU Community

Recommended Posts

Hi all

friends i have bad problem naw my rb25det build boost in nutral gear with stoped car

i heard that RICH & RETARD so i changed AIRflow METER 4 times and the mechanic changed the cas

3 times but still same thing can you help me pleas my car stoped i can`t drive it :)

Link to comment
https://www.sau.com.au/forums/topic/216461-rr-problem-without-solution/
Share on other sites

Hi all

friends i have bad problem naw my rb25det build boost in nutral gear with stoped car

i heard that RICH & RETARD so i changed AIRflow METER 4 times and the mechanic changed the cas

3 times but still same thing can you help me pleas my car stoped i can`t drive it :)

its also hisitating when driving

Hi dears

i did all this staff till now and about diagnostics i dont have tool

i changed maf 4 times all same result

i changed cas 3 times all same result

i tryed it without intercooler like direct its littel bit ok but small stuk from 5.5k to 6.5k rpm

and today we will try another turbocharger because some garage said if its littil crap will do same problem

so guys if some one have same this damin problem give us some help :thumbsup:

finally i am thinking that could be ignetion coils !!!!! :(

what mods are u running?

crook w/g actuator?

have u done a diagnostic? try resetting the ecu properly(shorting the 2 pins in the plug method)

dear am using stock turbo with stock wastegate but before i changed it i hade rb20det w/g

to gaine 10 psi

this thing start when i put new greedy front intercooler

I think your timing is off, is it being correctly adjusted AFTER you've been changing over the CAS sensors?

There isnt many things that will cause boost buildup in neutral and timing is the big one

Or the gauge could be faulty, put a decent one on there or are you using the stocker? (dont trust the stock one)

UltimateGTR - nothing to do with actutors etc... its not under load in idle plus the gate is closed on idle normally anyhow, so its gotta be fuel related, ie before turbo

I think your timing is off, is it being correctly adjusted AFTER you've been changing over the CAS sensors?

There isnt many things that will cause boost buildup in neutral and timing is the big one

Or the gauge could be faulty, put a decent one on there or are you using the stocker? (dont trust the stock one)

UltimateGTR - nothing to do with actutors etc... its not under load in idle plus the gate is closed on idle normally anyhow, so its gotta be fuel related, ie before turbo

no man when we changed the cas we adjust the timing by timing light

even i changed ecu with good one also i changed the coils all do same problem

but when we retaind factory intake manifold problem hapen in 5.5 to 6k

but really how could boost come up like antilage in nutral :banana:

i belive its ignition but where i don`t know

  • 2 weeks later...
When the timing is set, is the cas near the centre? Your harmonic balancer may have slipped, and your setting the timing very retarded.

yes brother its in center and with timing gun i got like 12 - 13 degres

all my mods now 3 inch exhust and pod filter with greddy intercooler front mont

and gtr fuel pump also i changed the plugs

yestarday we changed the three wires all long from MAF to ecu and the car runs good

but still i have loosing power in 3rd 4rth gear :P

by the way i am going to buy power fc ecu do you agrre with me ? that it will help me too much

and thanks all for help

What you mean the problem happened @ 5500rpm/6000rpm with the factory plenum?

What other parts are changed?

Full listing please

its noticable loss of power that somthing hold your car moments

and my mods are 3 exhust pod filter intercooler gtr fuel pump thats all now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...