Jump to content
SAU Community

Z32 Ecu Into R33 Gtst

riceyr33

By riceyr33,
in Engines & Forced Induction

 Share

Recommended Posts

riceyr33 Contributor

riceyr33

Posted
Posted

just looking of a cheap way to make power and i came across a nistune ecu remaping.

i know dr drift does a remaping for the 33.

but also heard about the z32 ecu that is modded to suit the 33 just wanted to no if someone knows someone that has done it and if its worth chasing down.

Link to comment
https://www.sau.com.au/forums/topic/216634-z32-ecu-into-r33-gtst/
Share on other sites
InterCooL Rising Star

InterCooL

Posted
Posted

rb20det ecu's are easy to remap and they can be used in r33's. its been done in WA and QLD but no tuner in NSW wants to touch the idea

also there's a member here called toshi who can send remap your r33 much cheaper than you would think. search him up and his prices / options

bumble_bee Rising Star

bumble_bee

Posted
Posted

i rang hyperdrive in WA, hey told they dont have the setup/software etc. to remap a rb25det(R33)

he told me that the people that made up nis-tune, wer working on a way to remap rb25det...

and i asked him if i could uses a rb20det (r32) ecu, but he said that the harness/plugs are totally different..

becoz i've heard of people in the east doind this....

dont no about this??? so if someone can confirm this....

but u would also lose the inlet VCT...

so yeah...

but someone plz confirm this...

thnx

InterCooL Rising Star

InterCooL

Posted
Posted
i rang hyperdrive in WA, hey told they dont have the setup/software etc. to remap a rb25det(R33)

he told me that the people that made up nis-tune, wer working on a way to remap rb25det...

and i asked him if i could uses a rb20det (r32) ecu, but he said that the harness/plugs are totally different..

becoz i've heard of people in the east doind this....

dont no about this??? so if someone can confirm this....

but u would also lose the inlet VCT...

so yeah...

but someone plz confirm this...

thnx

http://www.skylinesaustralia.com/forums/Rb...ul-t176944.html

i've pulled out both rb20 and 25 ecu's. they look like they are a plug in matter. but will need a tune to run...

W0rp3D Grand Master

W0rp3D

Posted
Posted

maybe i missed something but why not just use an r33 ecu, i emailed dr drift a while back and he didnt mention not being able to use my r33 ecu, is there any other reason that i have missed?

Mr Jollwah Community Regular

Mr Jollwah

Posted
Posted

Yeah the r33 is a bit of a pain, this is apparently due to nissan changing to hitachi H8 chip.

You need a daughter board to use an emulator to enable you to make changes real time and these are unfortunately expensive.

There are guys out there that do R33 tuning but they would have an ecu with daughterboard installed to do the tune and the burn that data onto a H8

chip and put that into a 64 pin socket in your ecu.

So yes it's possible to "chip" R33 ecu's but it ain't cheap.

W0rp3D Grand Master

W0rp3D

Posted
Posted
Yeah the r33 is a bit of a pain, this is apparently due to nissan changing to hitachi H8 chip.

You need a daughter board to use an emulator to enable you to make changes real time and these are unfortunately expensive.

There are guys out there that do R33 tuning but they would have an ecu with daughterboard installed to do the tune and the burn that data onto a H8

chip and put that into a 64 pin socket in your ecu.

So yes it's possible to "chip" R33 ecu's but it ain't cheap.

this is a quote i got back from dr drift, i little bit more expensive than a pfc but it has its benefits over pfc as well.

"Rough cost is $1000 for ECU modifications and bas maps to suit your mods,

and $300 - $400 for a full tune on the dyno."

Mr Jollwah Community Regular

Mr Jollwah

Posted
Posted

Becareful talking about Benefits of STD ecu over PFC.

ALOT of people around here love them :)

Nah PFC does have better map resolution over std ecu 20 x 20 over 16 x 16.

Not enough for me though, I'd rather keep the knock retard function of the std ecu rather than a winky check engine light.

W0rp3D Grand Master

W0rp3D

Posted
Posted
Not enough for me though, I'd rather keep the knock retard function of the std ecu rather than a winky check engine light.

i tend to agree, apparently the pfc display will tell you there is too much knock but i wouldnt have the handset on display so i would never see it.

i know the pfc is a popular item but it seems that the std ecu just has a few more safety features that i like, this is also coming from someone who already owns a pfc.

Mr Jollwah Community Regular

Mr Jollwah

Posted
Posted

Ah Ok, I was thinking bout using my r33 ecu but being in SA It seems easier to go a z32 ecu with nistune.

Besides nistune allows realtime tuning though consult port and dataloging, which is really what I wan't.

Mr Jollwah Community Regular

Mr Jollwah

Posted
Posted

Yes it is real time ;) I'd assume that dr drift would intstall a daughter board into the r33 ecu you'd then use an emulator to modify the rom and then burn a new chip with your tune and your done.

Some tuners use a development ecu which has the daughterboard installed and use that to develop the tune and then burn and install a "chip" into the customers ecu.

The advantage of nistune is that you plug your laptop into your consult plug via a consult interface and make the adjustments, no emulator or programmer required.

I believe that you can use nistune on a r33 ecu with a daughter board installed.

  • 2 weeks later...
Dr_Drift Veteran

Dr_Drift

Posted
Posted (edited)

Yes nistune does work with a cheaper emulator than I use, which means more workshops will have the ability to tune R33s in real time very soon. Also, as the R33 eprom based boards are now available, compared to the old single burn expensive H8 style processor maps, means no additional charge for retunes on new mods etc etc on eprom boarded ecus... h8 processor replacement rather than daughter boards are still a good option for those not looking at many retunes.

Sam

Edited by Dr_Drift

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...