Jump to content
SAU Community

Recommended Posts

Just had my exhaust completed by adding 3" dump and front pipes to the existing 3" hi-flow cat and 3" cat-back system.

Problem now is that the acceleration *feels* lazy, especially 2nd gear. Even the dodgy stock boost gauge is peaking a bit lower than what it was. Granted, I haven't got any actual data to show for a loss in power, but its a feeling that I'm getting which is enough for me. :D

Its not a flat-patch at a certain rev-range, it simply feels that the car is slower all the way through.

Anyone else had this sort of experience?

On the plus side, I can hear the turbo spooling up more now, which I like but that doesn't make up for when I'm getting smaller in someone else's rear-view mirror.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/
Share on other sites

I don't have a boost controller so I can only assume I'm running stock boost. That being said, the stock gauge reckons its running at about 9psi (needle *was* right on that middle mark between 0 and +7, now its just under it).

I wondered if the ECU wasn't used to the breathing space but I haven't done anything about that (no piggybacker or reset or anything logical) and I'm pretty certain the O2 sensor is ok. It will be old, but ok and I'm basing that on the fact that the car was doing well before the new pipes were put it. Although, I'm now wondering if the mechanic perhaps had a go at cleaning the o2 sensor. Would that have an affect on the ECU at first, particularly if it was really grubby before?

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836673
Share on other sites

I put FMIC, Pod, Full exhaust and my car went worse than before the mods. once I got my turbo Hiflowed and tuned to suit all the mods...Its a Rocket.

Stock ECU is good for the STOCK setup once you change something the tune needs to change with it. do all the mods you wanna do then get a ECU of somesort either stand alone or piggyback and get it tuned properly.

My car has gone from using 13.5 Litres per 100 to 8.8 Lph, not to mention bucket loads more power on the loud pedal.

and still makes full boost by 3000rpm.

Dave

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836741
Share on other sites

I was hoping to get an ECU remap with Dr Drift once I got my boost controller and FMIC installed. Unfortunately I probably won't be able to get the FMIC put in for a while.

What would people recommend so far as an interim tuning goes? Is it worth it, or even possible (without any PFC/SAFC etc), to get some sort of tuning done prior to the FMIC?

Maybe I should resolve myself to biting either one of those bullets: "zero-power" or "empty-wallet" until a proper ECU solution is found.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3836855
Share on other sites

If the computer is the problem why dont you just put the stock dump/front pipe back on then save for the computer then get it all done. Have you checked to make sure it was all installed properly? or did u tell your mechanic the situation?

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3837129
Share on other sites

Yeah as others have said.

I'd get it on a dyno.

Check the AFR's, fuel pressure, boost pressure and other basic things while there and get an idea of where the car it at.

Then workout what area it is thats needing the attention

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3838232
Share on other sites

  • 2 weeks later...

what? thats impossible, then why go for an extra dump pipe if you ain't going to tune your car?

What you guys are saying goes against the theory a turbo back gives more power than a cat back (with no tune).

Does this power loss theory with an extra dump pipe also apply to GTT R34's??????????????????

Edited by 10MinuteCar
Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3866199
Share on other sites

Does this power loss theory with an extra dump pipe also apply to GTT R34's??????????????????

Its even worse on a 34gtt, i dynod one stock, then he came back with a full turbo back 3.5in, and front mount. It gained 5rwkw up top and lost about 30rwkw everywhere else. Put a pfc on it and got it all back and heaps more.

Link to comment
https://www.sau.com.au/forums/topic/217298-is-this-common/#findComment-3866266
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
    • That is gates blue racing belt
    • Anyone found gates blue racing to be extremely tight/ almost impossible to install without moving the exhaust gear
×
×
  • Create New...