Jump to content
SAU Community

Recommended Posts

  • Replies 895
  • Created
  • Last Reply

Top Posters In This Topic

If the price is about $2k i wouldnt hold too many in stock as the benefits for the average skyline owner wont justify the price increase over pfc

again...this ECU is not suited to everyone....but think about this...

how many people spend $800+ on camshaft upgrades that have a minimal effect on performance...a lot!

wait until we do some back to back testing and publish some results...i think they will have a place in the aussie skyline performance market.

Feature list sounds suspiciously like a great aussie ecu I know, price too.

If it is the same ecu, I've seen nothing but good results with these, but as always its the tuner that makes the most of it(or not) in the end.

Edited by infamous_t
think about it...sell Power FC, AFM's and boost controller and upgrade costs next to nothing

well.. apart from the new intake pipes and re-tune, yeh.

I guess for those looking at MOTEC level of capabilities, it's a bargain.

for the masses of 12 second 250rwkw skyrines, it's not worth the extra dollars over a PFC.

when i think about it...

PFC $1300

Gizzmo Launch Controll $400 (second hand its 700 new)

Q45 AFM $180

Boost Controll Kit $350

I i will have $200 left over from selling all my stuff and buying this ECU.

ANother Thought...High and Low Impedence Injectors?

This Is Sounding Very Tempting...Although I have to get my car driving again before id think about this....Was going to Go an E11v2.

Waiting to how many see in/out puts this one has as I wanna run water Injection, thermos etc

Would be awsome to have water inj triggered by intake temp.

ANother Thought...High and Low Impedence Injectors?

This Is Sounding Very Tempting...Although I have to get my car driving again before id think about this....Was going to Go an E11v2.

Waiting to how many see in/out puts this one has as I wanna run water Injection, thermos etc

Would be awsome to have water inj triggered by intake temp.

injectors can be selected from a table by part no. (denso ********) or brand (Blitz 1000cc) very easy...high and low imped.

water inj. triggered by intake temp. not a drama...switching on and off thermo's...just as easy

Edited by DiRTgarage

The following info might answer a few questions and clear a few things up for people.....

The V44 standalone has 4 injector and 4 ignition outputs. The plug-in ECU based on the V44 have six injector and six ignition outputs. The V88 model has 8 injector and 8 ignition outputs. Also it has knock control and DBW throttle control. Both ECU have motorsport features like antilag, WOT shift, launch control.

These ECU use a 32 bit microcontroller running at 42Mhz. This processor is designed for engine control and has the power and speed to work with crank and cam trigger signals in real time. It does not use the time based system like the Autronic. The result is far more stable ignition and injector control. On engines with multitooth crank triggers the ECU reads and uses every signal for maximum resolution.

Some of the features are,

Missing tooth engines can run wasted spark without a sync signal.

User can set reluctor input signal threshold. (this lets you tune out any interference)

Variable cam control for up to four cams. (V88 only)

Outputs can be controlled by GPC tables or PID with feedback.

ECU case is extruded with water proof connectors. Case is small and not box shaped (looks very good).

V44 has one connector and the V88 has two connectors.

Idle control is very very good and very easy to setup.

No popping in the exhaust on overrun with smooth transition in and out of over run

Fixed duty boost control.

Different boost in each gear.

Dual fuel and Ignition tables that can be externally switched.

Up to 12 cylinder multi coil engine support

DBW throttle control (V88)

QuickTune (Autotune) feature on both V44 and V88.

Inputs and Outputs:

V44 injector = 4

V44 ignition = 4

V44 analog inputs = 3/4*

V44 temp inputs = 2

V44 digital inputs = 3/4*

V44 AUX outputs =8

V44 Connector pin number = 34 (one connecter)

*one Digital input shares the same pin as one analogue input

V88 injector = 8

V88 ignition = 8

V88 analog inputs = 11

V88 temp inputs = 4

V88 digital inputs = 10

V88 AUX outputs = 10

V88 Knock input = 2

V88 Connectors pin number = 2 x 34 (two connecter)

V88 has:

- E-Throttle (drive by wire throttle)

- Peak & Hold (individual P&H current control)

- Dual Knock

- 4MB of logging memory

Both ECU's have:

- 8V out

- 5V out

- Trigger in = 2

- USB Coms connector

- Can Bus Coms connector

- All spare injection and ignition channels can be auxiliary outputs

Trigger support for the following patterns:

All Mitsubishi 4 and 6 cylinder.

All Subaru 4 and 6 cylinder

All Nissan optical

BMW S50

Buick 3.8L

Ford TFi 4, 6 and 8 cylinder

Ford 36-1

Ford Cosworth RS500

GM LS1

GM LS7

GM LT1

Honda K20

Honda S2000

Honda V6

Motronic 60-2

MX5

Porsche 944

RX7

Suzuki Baleno

Toyota 36-2

Toyota 2NZ VVTi

Toyota 1ZZ VVTi

Toyota 3SGTE VVTi

Toyota 1UZ VVTi

Toyota 1JZ-GTE and 2JZ-GTE

Toyota 1JZ-GTE VVTi

Toyota 2JZ-GTE VVTi

Other patterns can be added quickly with the correct information supplied.

Plug-in ECU:

Subaru 1994-96 (V44)

Subaru 1997-98 (V44)

Subaru 1999-00 (V44)

Subaru 2001-05 2L (V44)

Subaru 2005-2007 2.5L (V88 with DBW)

Mitsubishi EVO 1 to 6 (V44)

Mitsubishi EVO 7 to 8 (V44)

Mitsubishi EVO 9 (V88)

Nissan N14 (V44)

Nissan S13 (V44)

Nissan S14 (V44)

Nissan S15 (V44)

Nissan GTiR (V44)

Nissan GT-R (R32-R34) (V88)

Nissan GTS (R32-R33) (V88)

Mazda MX5 1.6L (V44)

Mazda MX5 1.8L (V44)

Mazda 323 GTX (V44)

Mazda RX7 (V44)

Toyota MR2 SW20 (V44)

Toyota Celica ST185 (V44)

Toyota Celica ST205 (V44)

As you can see this is quite an extensive product and very well engineered and produced. It is far superior than the Autronic in a few features especially over-run control. Personally im itching to get it in the car and try it.

Edited by DiRTgarage

Depends how nuts you want to go, the bikirom daughterboard (running version 3 software) is more than good enough in the R34, especially for the price. You've got full access via USB to most of the maps you'd want to frig with. The only thing V3 is missing is real-time upload, but that's been sorted with V4 anyway...so bit of a moot point.

So easy to tune now it's sickening, shame it was like this out of the box 2 years ago, took time to develop I suppose.

Depends how nuts you want to go, the bikirom daughterboard (running version 3 software) is more than good enough in the R34, especially for the price. You've got full access via USB to most of the maps you'd want to frig with. The only thing V3 is missing is real-time upload, but that's been sorted with V4 anyway...so bit of a moot point.

So easy to tune now it's sickening, shame it was like this out of the box 2 years ago, took time to develop I suppose.

Yeah, but they wanted to make sure when it hit the market it hit the ground running...

having the thing not up to scratch would have given the product a bad name from the get-go and something that would have been hard to shake.

The thing is constantly under development and even last week underwent quite a number of needed changes after tuner feedback.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...