Jump to content
SAU Community

Recommended Posts

  • Replies 895
  • Created
  • Last Reply

Top Posters In This Topic

If the price is about $2k i wouldnt hold too many in stock as the benefits for the average skyline owner wont justify the price increase over pfc

again...this ECU is not suited to everyone....but think about this...

how many people spend $800+ on camshaft upgrades that have a minimal effect on performance...a lot!

wait until we do some back to back testing and publish some results...i think they will have a place in the aussie skyline performance market.

Feature list sounds suspiciously like a great aussie ecu I know, price too.

If it is the same ecu, I've seen nothing but good results with these, but as always its the tuner that makes the most of it(or not) in the end.

Edited by infamous_t
think about it...sell Power FC, AFM's and boost controller and upgrade costs next to nothing

well.. apart from the new intake pipes and re-tune, yeh.

I guess for those looking at MOTEC level of capabilities, it's a bargain.

for the masses of 12 second 250rwkw skyrines, it's not worth the extra dollars over a PFC.

when i think about it...

PFC $1300

Gizzmo Launch Controll $400 (second hand its 700 new)

Q45 AFM $180

Boost Controll Kit $350

I i will have $200 left over from selling all my stuff and buying this ECU.

ANother Thought...High and Low Impedence Injectors?

This Is Sounding Very Tempting...Although I have to get my car driving again before id think about this....Was going to Go an E11v2.

Waiting to how many see in/out puts this one has as I wanna run water Injection, thermos etc

Would be awsome to have water inj triggered by intake temp.

ANother Thought...High and Low Impedence Injectors?

This Is Sounding Very Tempting...Although I have to get my car driving again before id think about this....Was going to Go an E11v2.

Waiting to how many see in/out puts this one has as I wanna run water Injection, thermos etc

Would be awsome to have water inj triggered by intake temp.

injectors can be selected from a table by part no. (denso ********) or brand (Blitz 1000cc) very easy...high and low imped.

water inj. triggered by intake temp. not a drama...switching on and off thermo's...just as easy

Edited by DiRTgarage

The following info might answer a few questions and clear a few things up for people.....

The V44 standalone has 4 injector and 4 ignition outputs. The plug-in ECU based on the V44 have six injector and six ignition outputs. The V88 model has 8 injector and 8 ignition outputs. Also it has knock control and DBW throttle control. Both ECU have motorsport features like antilag, WOT shift, launch control.

These ECU use a 32 bit microcontroller running at 42Mhz. This processor is designed for engine control and has the power and speed to work with crank and cam trigger signals in real time. It does not use the time based system like the Autronic. The result is far more stable ignition and injector control. On engines with multitooth crank triggers the ECU reads and uses every signal for maximum resolution.

Some of the features are,

Missing tooth engines can run wasted spark without a sync signal.

User can set reluctor input signal threshold. (this lets you tune out any interference)

Variable cam control for up to four cams. (V88 only)

Outputs can be controlled by GPC tables or PID with feedback.

ECU case is extruded with water proof connectors. Case is small and not box shaped (looks very good).

V44 has one connector and the V88 has two connectors.

Idle control is very very good and very easy to setup.

No popping in the exhaust on overrun with smooth transition in and out of over run

Fixed duty boost control.

Different boost in each gear.

Dual fuel and Ignition tables that can be externally switched.

Up to 12 cylinder multi coil engine support

DBW throttle control (V88)

QuickTune (Autotune) feature on both V44 and V88.

Inputs and Outputs:

V44 injector = 4

V44 ignition = 4

V44 analog inputs = 3/4*

V44 temp inputs = 2

V44 digital inputs = 3/4*

V44 AUX outputs =8

V44 Connector pin number = 34 (one connecter)

*one Digital input shares the same pin as one analogue input

V88 injector = 8

V88 ignition = 8

V88 analog inputs = 11

V88 temp inputs = 4

V88 digital inputs = 10

V88 AUX outputs = 10

V88 Knock input = 2

V88 Connectors pin number = 2 x 34 (two connecter)

V88 has:

- E-Throttle (drive by wire throttle)

- Peak & Hold (individual P&H current control)

- Dual Knock

- 4MB of logging memory

Both ECU's have:

- 8V out

- 5V out

- Trigger in = 2

- USB Coms connector

- Can Bus Coms connector

- All spare injection and ignition channels can be auxiliary outputs

Trigger support for the following patterns:

All Mitsubishi 4 and 6 cylinder.

All Subaru 4 and 6 cylinder

All Nissan optical

BMW S50

Buick 3.8L

Ford TFi 4, 6 and 8 cylinder

Ford 36-1

Ford Cosworth RS500

GM LS1

GM LS7

GM LT1

Honda K20

Honda S2000

Honda V6

Motronic 60-2

MX5

Porsche 944

RX7

Suzuki Baleno

Toyota 36-2

Toyota 2NZ VVTi

Toyota 1ZZ VVTi

Toyota 3SGTE VVTi

Toyota 1UZ VVTi

Toyota 1JZ-GTE and 2JZ-GTE

Toyota 1JZ-GTE VVTi

Toyota 2JZ-GTE VVTi

Other patterns can be added quickly with the correct information supplied.

Plug-in ECU:

Subaru 1994-96 (V44)

Subaru 1997-98 (V44)

Subaru 1999-00 (V44)

Subaru 2001-05 2L (V44)

Subaru 2005-2007 2.5L (V88 with DBW)

Mitsubishi EVO 1 to 6 (V44)

Mitsubishi EVO 7 to 8 (V44)

Mitsubishi EVO 9 (V88)

Nissan N14 (V44)

Nissan S13 (V44)

Nissan S14 (V44)

Nissan S15 (V44)

Nissan GTiR (V44)

Nissan GT-R (R32-R34) (V88)

Nissan GTS (R32-R33) (V88)

Mazda MX5 1.6L (V44)

Mazda MX5 1.8L (V44)

Mazda 323 GTX (V44)

Mazda RX7 (V44)

Toyota MR2 SW20 (V44)

Toyota Celica ST185 (V44)

Toyota Celica ST205 (V44)

As you can see this is quite an extensive product and very well engineered and produced. It is far superior than the Autronic in a few features especially over-run control. Personally im itching to get it in the car and try it.

Edited by DiRTgarage

Depends how nuts you want to go, the bikirom daughterboard (running version 3 software) is more than good enough in the R34, especially for the price. You've got full access via USB to most of the maps you'd want to frig with. The only thing V3 is missing is real-time upload, but that's been sorted with V4 anyway...so bit of a moot point.

So easy to tune now it's sickening, shame it was like this out of the box 2 years ago, took time to develop I suppose.

Depends how nuts you want to go, the bikirom daughterboard (running version 3 software) is more than good enough in the R34, especially for the price. You've got full access via USB to most of the maps you'd want to frig with. The only thing V3 is missing is real-time upload, but that's been sorted with V4 anyway...so bit of a moot point.

So easy to tune now it's sickening, shame it was like this out of the box 2 years ago, took time to develop I suppose.

Yeah, but they wanted to make sure when it hit the market it hit the ground running...

having the thing not up to scratch would have given the product a bad name from the get-go and something that would have been hard to shake.

The thing is constantly under development and even last week underwent quite a number of needed changes after tuner feedback.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...