Jump to content
SAU Community

Car Mechanics

GI Joe

By GI Joe,
in South Australia

 Share

Recommended Posts

GI Joe Collaborator

GI Joe

Posted
Posted

Okay, so im thinking about getting a manual conversion done for my car, and im ringing around to get quote...

This one garage that apparently has "Very good reputation" and "started JDM in Australia" according to some magazines looked quite promising, but the service i got from them is shit.

Ive sent them 3 enquiry emails with no returns, and ive also called them up twice, and the only answer i got was the mechanic will call me back in half an hour, which was like 6 days ago!

Does anyone have any good workshops where i can do a manual conversion, but without the sh%t attitude?

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/
Share on other sites
Krishy Grand Master

Krishy

Posted
Posted

tilbrooks and boostworx is who i would trust my car with mate...but there are heaps of other import places around

tilbrooks up north

boostworx down south

just depends where you live and how far your willing to drive mate

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3861958
Share on other sites
Krishy Grand Master

Krishy

Posted
Posted

then dude i would be calling tilbrooks and boostworx and see which one can provide you with the best quote out there....and then whichever one is cheaper then i would go there and as for service then i would say it would be prob the same at either place.....both places are very well known places mate

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3862237
Share on other sites
JDM032 Experienced

JDM032

Posted
Posted

i agree with wat benm said +1

i kno the place u are talking about and my car is there at the moment.

working in the import business even i dont like to give too much info over the phone.

if someone wants something done then u have to go in there and ask them in person wat the cost is gonna be,

most of the time it mite be cheaper then expected.

but go to more then one place and ask,

or if you want i can source you a conversion kit and a place to do it for you??

call me at Kansai 8447 1025 and i will help you. just remind me who u r on this forum.

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3862439
Share on other sites
Dohmar Grand Master

Dohmar

Posted
Posted
Okay, so im thinking about getting a manual conversion done for my car, and im ringing around to get quote...

This one garage that apparently has "Very good reputation" and "started JDM in Australia" according to some magazines looked quite promising, but the service i got from them is shit.

Ive sent them 3 enquiry emails with no returns, and ive also called them up twice, and the only answer i got was the mechanic will call me back in half an hour, which was like 6 days ago!

Does anyone have any good workshops where i can do a manual conversion, but without the sh%t attitude?

Raul Mendoza of Mendoza motors did my r31 auto -> manual conversion in 2003.... was a really top job and didnt cost the earth, sadly I dont have his contact details but his workshop is in salisbury, near parafield airport

-D

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3862443
Share on other sites
DIOR 33 Veteran

DIOR 33

Posted
Posted

I would take my car to tilbrooks to get that done i take my car there and have done from the start marky and I are really good friends

just spoke to mark and told him one of my sau mates is bla bla,

he said that if you get all the parts he will put it in for you for $1000 cause he said the tail shaft needs removing and it takes a while to do with bleeding and all that,

also if you get your parts from jap import spares thell coogy yhat kellie and mark send you and he will look after you

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3862617
Share on other sites
ted180 Mentor

ted180

Posted
Posted
Don't call or email, mechanics aren't exactly 'people persons' or 'nerds' they are greasey spanner throwing mechanics.

Visit them in person and take your car and they will be totally different people.

agreed.

they would also get hundreds of people ringing up wondering how much it costs to do god knows what to their cars, so going in with your car, knowing what your talking about shows them your serious.

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3862636
Share on other sites
skylineguy19 Mentor

skylineguy19

Posted
Posted

fours n more are also very good, done all the work on my 31, including engine and gearbox conversion. Awesome work and the guys have a great attitude there also. Talk to brenton or david and tell them luke with the r31 sent you. Their number is 82602011 and they are located langford st pooraka.

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3866638
Share on other sites
MYRB30 Rising Star

MYRB30

Posted
Posted
he said that if you get all the parts he will put it in for you for $1000 cause he said the tail shaft needs removing and it takes a while to do with bleeding and all that,

For $1000 dollars I'll do it here at home, yes I am qualified. :P Seriously to remove a auto and fit a manual is not going to cost a grand. Its an afternoons work at best. These performance shops make me mad, they'll build you a motor super cheap, but any job that should be easy, whaamo, big bucks, I cant work them out. I used to work at a Importer in Adelaide and we were charging $1500 fitted inc parts. (obviously not rb25 box, but other vehicles)

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3866746
Share on other sites
bokee Collaborator

bokee

Posted
Posted
Okay, so im thinking about getting a manual conversion done for my car, and im ringing around to get quote...

This one garage that apparently has "Very good reputation" and "started JDM in Australia" according to some magazines looked quite promising, but the service i got from them is shit.

Ive sent them 3 enquiry emails with no returns, and ive also called them up twice, and the only answer i got was the mechanic will call me back in half an hour, which was like 6 days ago!

Does anyone have any good workshops where i can do a manual conversion, but without the sh%t attitude?

hey buddy i found John from Hitech Dyno Tune to be very helpfull give him a ring on 8277 4400 he is located in Melrose Park just off south rd emanuel ct. cant remember what number

Link to comment
https://www.sau.com.au/forums/topic/218936-car-mechanics/#findComment-3867176
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...