Jump to content
SAU Community

Recommended Posts

A mate of mine was telling me that there was a wrecked Black skyline near the mounts bay rd on the freeway about 3:00 ish.

From his description it sounds like an R33 about '94.

Any one else kow any details.

My mate believes that the front (left?) wheel had come off and the rest of the car ploughed into the road demoliting and tearing off the front end.

Of course he may just be yanking my chain.

Link to comment
https://www.sau.com.au/forums/topic/21932-black-skyline-freeway-accident/
Share on other sites

Yupp there was indeed a mangled black r33 on the freeway thisarvo - didn't see the actual accident so no idea of how it happened, but got a decent view of the aftermath from work (in QV1).

From what I could see it looked like the front wheel (and perhaps part of the axel) had been ripped off completely, the front was completely destroyed.

It looked like a single car accident but can't say for sure because I couldn't see the point of impact from where I was.

apperently there was also a roll over on one of the freeway entry's, which if it was leach highway, wouldn't suprise me, it was covered in oil or petrol as i discovered when i had to make emergency use of the handbrake to get my work car to slide around the entry instead of plow understeering straight into the curb....

shithouse FWD car..

Originally posted by XRW

apperently there was also a roll over on one of the freeway entry's, which if it was leach highway, wouldn't suprise me, it was covered in oil or petrol as i discovered when i had to make emergency use of the handbrake to get my work car to slide around the entry instead of plow understeering straight into the curb....

shithouse FWD car..

Hehe... I thought things were a little more slippery than usual this morning going down that on-ramp:

"Wheeeee.... oh.... ummm... uh oh... holy oil leak, Batman... UH OH.... aw cr@p!!!!"

Ditto on the FWD comments - I want 4wd! :uh-huh:

4wd would have only been marginally better if at all, rwd would have probally just resulted in looping it, oh well can't win them all..

i did notice there looked to be saw dust/sand all thew way down the ramp when i went past it heading south on the freeway this morn so maybe they actually figured it was worth checking out..

Yep I can also confirm this took place.... I am also in QV1 and had a great view of what was going on.... the traffic banked up all the way back to the leaderville train station on the freeway. It was what looked to be a black skyline but didnt look overly damaged but it did appear the wheel had come off causing a spin. He was blocking 3 lanes of the freeway whilst the toe truck tried to remove the car .... :)

Got on the freeway at Hay St just as it happen, ie. all the cars up to 200m ahead slammed on the skids just as I got there. The front tyre was cleared from the right lane just as I went past. It was a nice looking car, minutes earlier. It has a personalised black plate "AF 888" if anyone knows him. He seemed unhurt.

I am not sure which came first, the wheel coming off or the front right corner ploughing into the concrete barrier.

Haha got there relatively early for that Leach Hwy event. There was a nice sized pile up, 3-4 cars, when i got there and they had blocked off the onramp. Seems every1 coming down the ramp lost it and dam near ended up across the freeway. All they needed was some benny hill music.;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...