Jump to content
SAU Community

Recommended Posts

Hi Alex,

I'm no expert when it comes to oil but some peoples ideas on this forum (not this thread) can be totally wrong. Remembering oil is a very complex item and in terms of lubrication, there are many tradeoffs from start up lubrication to hot lubrication, and the amount of heat the oil transfers around the car.

In reply to your question Alex the 10w-60 seems ok for Canberra all year round. The manual (for my car and I believe yours) says 7.5-35w oil. So a 5 or 10 weight oil when cold should be fine. The higher number (hot) can generally be as high as you want, if you are racing the 60w is when most people recommend as the oil gets very hot and as you probably know oil thins out the hotter it gets, daily driving 40 is fine as the oil never reaches really high temperatures.

I've been running Shell 5-40w but I will be using the Castrol 10-60w in Summer or for any track days.

I've never changed oil on an RB25 but it can't be as hard as the RB26. Just don't rev the engine to get the last bits of oil out :-)

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3884876
Share on other sites

Hi Alex,

I'm no expert when it comes to oil but some peoples ideas on this forum (not this thread) can be totally wrong. Remembering oil is a very complex item and in terms of lubrication, there are many tradeoffs from start up lubrication to hot lubrication, and the amount of heat the oil transfers around the car.

In reply to your question Alex the 10w-60 seems ok for Canberra all year round. The manual (for my car and I believe yours) says 7.5-35w oil. So a 5 or 10 weight oil when cold should be fine. The higher number (hot) can generally be as high as you want, if you are racing the 60w is when most people recommend as the oil gets very hot and as you probably know oil thins out the hotter it gets, daily driving 40 is fine as the oil never reaches really high temperatures.

I've been running Shell 5-40w but I will be using the Castrol 10-60w in Summer or for any track days.

I've never changed oil on an RB25 but it can't be as hard as the RB26. Just don't rev the engine to get the last bits of oil out :-)

an important thing to note, is that while you are definitely correct in using thicker oils in racing, for daily driven purposes using too thick of an oil can be detrimental in the worst cases. certainly with cars like skylines, people want to rev the engine occasionally, however the cars may only be used for 30-40 minutes at a time. if i recall properly the best viscosity for protection at high revs is between 10-15 centistokes. for a 10w-60 oil to reach 15cs it needs to be over 120 degrees C, while 10w40 needs to be over 100degrees C. 10w40 only starts to become too thin over 120degrees.

the problem is at 90 degrees C, 10w60 oil is still 30cs and too thick for revving an engine. high engine speed and high viscosity can lead to foaming and worst of all cavitation

im not an oil expert either, im just saying its important to identify what purpose your oil needs to fulfill, racing protection or daily longevity. for my next oil change ill probably get a synthetic like 5w-40 or 0w40 as the viscosity offers more protection when the car is first started at low temperature. your current shell 5w-40 sounds like a good bet for daily use, perhaps its a good idea to put in thicker oil specifically for a track day, but run the thinner oil when you go back to daily use

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3885794
Share on other sites

an important thing to note, is that while you are definitely correct in using thicker oils in racing, for daily driven purposes using too thick of an oil can be detrimental in the worst cases. certainly with cars like skylines, people want to rev the engine occasionally, however the cars may only be used for 30-40 minutes at a time. if i recall properly the best viscosity for protection at high revs is between 10-15 centistokes. for a 10w-60 oil to reach 15cs it needs to be over 120 degrees C, while 10w40 needs to be over 100degrees C. 10w40 only starts to become too thin over 120degrees.

the problem is at 90 degrees C, 10w60 oil is still 30cs and too thick for revving an engine. high engine speed and high viscosity can lead to foaming and worst of all cavitation

im not an oil expert either, im just saying its important to identify what purpose your oil needs to fulfill, racing protection or daily longevity. for my next oil change ill probably get a synthetic like 5w-40 or 0w40 as the viscosity offers more protection when the car is first started at low temperature. your current shell 5w-40 sounds like a good bet for daily use, perhaps its a good idea to put in thicker oil specifically for a track day, but run the thinner oil when you go back to daily use

Hey Zoomzoom sounds like he knows what he's talking about. We had to find someone who could put some science behind it.

Just remember get the oil that is classed as a fully synthetic oil and also remember that different oils of the same rated viscosity can react differently.

I remember a certain mechanic telling me the 5-40 weight oil was too light for the GTR when cold (the 5) and that was why I was having a leakage issue.

Link to comment
https://www.sau.com.au/forums/topic/220214-what-oil/#findComment-3887759
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...