Jump to content
SAU Community

Recommended Posts

Well I finally got my hands on a set of Tomei Poncamshafts they are second hand and wondering if they are original as I cannot find any document to support its markings.

I figure from assumption that these are real, one because the guy is really honest and two sort of makes sense.

So the Markings are either a 115 or A2691XR which I figure "2691" stands for.. 260 duration and 9.15 lift i.e 26.91

But I wanted confirmation from someone as I know Poncams are not TOMEI stamped but PROCAMS are so making it harder.

If someone could confirm this for me please?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/220558-tomei-poncam-markings/
Share on other sites

physical difference you can measure is the cam gear drive on the poncams was larger than standard (we had to drill the cam gears out)

WTF??? You don't drill them out.

Were you using aftermarket gears?

and to answer the other guys question. Just measure the cam yourself and find out what lift/duration it has.

Well I finally got my hands on a set of Tomei Poncamshafts they are second hand and wondering if they are original as I cannot find any document to support its markings.

I figure from assumption that these are real, one because the guy is really honest and two sort of makes sense.

So the Markings are either a 115 or A2691XR which I figure "2691" stands for.. 260 duration and 9.15 lift i.e 26.91

But I wanted confirmation from someone as I know Poncams are not TOMEI stamped but PROCAMS are so making it harder.

If someone could confirm this for me please?

Cheers

Is A2691XR stamped on the rear of the camshaft? Thats exactly what mine had.

I think if u do a search for say 2691 I think it will bring up a forsale thread where a guy has those part numbers listed on his tomei cams.

Edited by GTR1993
No measuring tools, and no standard shaft to measure against i.e still in engine.

R33 you nicked my sig!!!

You don't need a standard shaft.

You do need measuring tools. And just calculate the duration and lift. But anyway, have fun with your new cams

There were no marking on mine either. I was a bit shocked when we pulled them out a few months later, i was thinking the guys who originally put them in ripped me off and i was using that excuse for the 10-15rwkw we were missing before to after.

But it was all good after we measured them :P

Good to see you finally got them Nathaniel,but dont be suprised if you dont see a big difference on the dyno. The pedal and through the bum of your seat is where you will notice the difference. Not as must pedal needed to get up to certain speed ect.. I noticed the improvement more when i was driving the car off boost.

Thanks Dave, I never intended to take the car to this level (but am already looking further) any improvement will tickle a smile from my face.

Thanks for the help peoples.

Noone ever does,once the bug has bitten there is no turning back.

WTF??? You don't drill them out.

Were you using aftermarket gears?

and to answer the other guys question. Just measure the cam yourself and find out what lift/duration it has.

os giken gears, the drive on the poncams was significantly larger than the standard cams

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...