Jump to content
SAU Community

Recommended Posts

Hi all.

I have noticed a lot of Stageas popping up so I thought I would post up what I have to lend out to get people through regency or off defect;

- Stock exhaust for a S1

- Stock suspension that came out of a S1 but will fit a S2 providing it isn't a RS-Four-S (factory manual as the mounts are different).

- Stock suspension from my S2 RS-Four-S with RS*R springs that are way over legal height which will also fit a RS260 I am told.

Cheers,

Peter.

Hey, was wondering if someone could lend me the Tein spanners so i can adjust my ride height. I have the "HA" Tein Coilovers..Possible even give me a hand lowering it.....never done it before.. cheers

pm sent

i have a 33 sitting at home, if any1 needs any parts to get through regancy just let me know, mine has just gone through regancy, cost me $13,000 cause of all the shit i had to buy for it, didnt know any1 in adelaide to borrow from, lol, thats is until the car sells, cheers ken

i have a 33 sitting at home, if any1 needs any parts to get through regancy just let me know, mine has just gone through regancy, cost me $13,000 cause of all the shit i had to buy for it, didnt know any1 in adelaide to borrow from, lol, thats is until the car sells, cheers ken

you could have bought a nice series 1 r33 for that price ... lol

  • 2 weeks later...

Have the following stock parts available for R34 GTt. PM me if u want anything, its all boxed up in my shed just incase i need it

air box with filter

BOV

Intercooler

Cams

Injectors

Front Pipe

Cat Back (sorry cat center is punched out)

Rims with tyres

AFM

Fuel pump

ECU

Pressure plate (needs new center bearing)

Clutch

Flywheel

In need for compliance: (if people want to sell it to me thats fine)

R32 GTR seat

R32 GTR standard suspension

R32 GTR standard exhaust

R32 GTST standard suspension

R32 GTST standard exhaust

R32 GTST all standard arms :)

R32 GTST intercooler

Cheers,

Guys

In need for compliance: (if people want to sell it to me thats fine)

R32 GTR seat

R32 GTR standard suspension

R32 GTR standard exhaust

R32 GTST standard suspension

R32 GTST standard exhaust

R32 GTST all standard arms :P

R32 GTST intercooler

Cheers,

Guys

Cheers guys, Already got some parts lent to me.

Also after;

R32 Standard Steering Wheel

R32 Uncut Reo

Edited by JiN_MaN
Have the following stock parts available for R34 GTt. PM me if u want anything, its all boxed up in my shed just incase i need it

air box with filter

BOV

Intercooler

Cams

Injectors

Front Pipe

Cat Back (sorry cat center is punched out)

Rims with tyres

AFM

Fuel pump

ECU

Pressure plate (needs new center bearing)

Clutch

Flywheel

Also have standard coilpacks

Sorry CAT was binned when high flow cat was put on

  • 2 weeks later...

Petrol Generator 2000W or more

Has anyone got a generator I can borrow for a week. I need to drill 600 holes into concrete and there is on power at the site. With any luck I will finish over the weekend, but if it was possible to use it early next week as well that would be great.

PM me if you can help.

Guy

he copied me :blush:

LOL...are you being serious?? No offence luke but i have never even seen your car, let alone copied your 'style'..My girlfriend bought one over a year ago and wen this one came up at the right price i couldnt resist..As for the WORK rims well if youve got em, why not use em? dont stress mate, i wont rain on your parade, clearly your the original 34 4door style guru wizard... :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...