Jump to content
SAU Community

Recommended Posts

I have a 10% warning against my id. No idea who gave it or what it was for. How do we find out? I dont see the point in giving someone a warning for rule breaches without at least having the courtesy of PM ing the user to notify them of the rule breach. Without notification the user cannot then address the behaviour that the warning was issued for.

thanks

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/
Share on other sites

Didnt you get one for the posts in the "RB29" thread that time???

no apparantly not, i asked Ash and thought it was for that and he said he didnt give me a warning.

pretty weak to be warned without feedback.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3894371
Share on other sites

Slow day @ work boys? :)

Paulie - didnt it PM you with it? Usually it does i thought... (and no, it wasnt me that warned you :) )

I can PM you what the warning detail if you want?

Maybe it didnt get sent out correctly!

that would be great Ash...thanks

see he's ok guys :P

Ash how long does it stay there...how do i get rid of it?

If proper procedures were not used (PM etc) when warning was given, would that make the warning invalid??

BTW...im in a training course...so yes a very slow day...hehe

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3894420
Share on other sites

Warnings stay there permanently. There was some debate late last year i believe about warnings expiring and so on.

Eventual decision was they should stay as problem users *might* behave for 18months, and then warnings disappear and they get stuck back into it all again or something similar so it allows tracking for us easily.

You'd be very surprised how many people are on 10-20%, doesnt mean a lot. Only Admin/Mods can see it.

Aslong as you dont get to 30-40-50% then you dont have a lot to worry about, but then if someone has a couple of warnings they might need to revisit the board rules and ensure they do not go against them :)

If the PM wasnt used i dont believe you'd get off, its just an oversight and clicking the wrong button .. this isn't a court of law in relation to getting off things due to a technicality :)

Im bored at work too :P

Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3894445
Share on other sites

Im sure you two can work something out :P

I had a sicky today thats my excuse.

OK the Mod. in this case had a beef with me last year because he ran a group buy but did not do the research before hand to make sure he could supply the product. I pointed this out to him and he proceded to abuse me via PM calling me a "dumb grease monkey" and the like. The group buy failed due to him being unable to supply the product as i pointed out.

So this warning was a result of a personal vendetta.

Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3894447
Share on other sites

So nothing comes up when you click the "10%" or whoever much warning you have?

I got the naughty stick brought out on me for bumping a mates for sale thread, never got a pm, didn't know what it was for until I worked out that I had to click the %.

Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3895128
Share on other sites

not sure what details you were sent but one warning is for a personal attack, the other I am not sure as the details are not complete

was not a personal attack though, mine and many peoples opinion is, his kits are crap...not a personal attack...just an opinion on a product. He says he doesnt make any money off these kits so he's not a business either. Which in my opinion is crap too.

the Bu5ter one was a joke when i had a "this user is banned avatar"...he thought he'd be funny and actually ban me....hehe

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3897070
Share on other sites

I'm not trying to be difficult but this probably isn't the most appropriate forum for this discussion, if you disagree with a warning it should probably be taken up with the person who warned you, via PM. If that doesn't help or you'd prefer not to contact them, perhaps try contacting Christian / PranK.

Just a suggestion :laugh:

Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3900220
Share on other sites

Can someone let me know what I was warned for 30% for? This happened quite a while ago and I never gave it much thought thinking that it would disappear after a while.

Then now i realise that its permanent and I click on the 30% but it says 'no notes saved' or something along those lines and I never got a PM too.

Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3901143
Share on other sites

I'm not trying to be difficult but this probably isn't the most appropriate forum for this discussion, if you disagree with a warning it should probably be taken up with the person who warned you, via PM. If that doesn't help or you'd prefer not to contact them, perhaps try contacting Christian / PranK.

Just a suggestion :bunny:

why should i...the little maggot didn't afford me the courtesy of a PM.

Christian never replies to PM's so thats a dead end.

Edited by DiRTgarage
Link to comment
https://www.sau.com.au/forums/topic/220867-warnings/#findComment-3901594
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...