Jump to content
SAU Community

Recommended Posts

hi guys,

i want to change my timing belt but not sure if i should go with gates which i had before - or maybe a jap brand is better like hks or tomei...thoughts?

running 325awkw so needs to be good quality...

Unless you are running higher than factory rev limit, or using big cams/springs, i would personally use a Nissan one, they are fine for 100,000k+, and not much more than the aftermarket ones.

  • 1 year later...
blast from the past but i'm about to do a timing belt on rb26... whats everyones opinions on brand of belts?

thanks.

I just read about ten threads, If it were me, I would be going OEM, http://www.skylinesaustralia.com/forums/in...t&p=3879503

I just read about ten threads, If it were me, I would be going OEM, http://www.skylinesaustralia.com/forums/in...t&p=3879503

this time around i went with an OEM belt...now it makes sense why my previous engine made that whining sound on idle, it was my blue gates belt & yes my pulleys also picked up chunks of blue rubber from the belt as covered off in the above thread

if anyone wants an oem genuine nissan belt I have 2 brand new ones sitting here. find out what they cost, then send me a pm and I'll do it $$$ cheaper. :P

straight from the horses mouth: racepace recommend the Nissan OEM belt. The Nismo one is apparantly too strong and in theory doesn't allow enough flex to account for expanion of the motor when it warms up. Good enough for me OEM belt it is.

Nissan OEM Belt is $86 + GST.

I'd take you up on the offer for the belt but i'm in Melb and much easier for me to just go to my local Nissan dealer. Thanks anyway.

straight from the horses mouth: racepace recommend the Nissan OEM belt. The Nismo one is apparantly too strong and in theory doesn't allow enough flex to account for expanion of the motor when it warms up. Good enough for me OEM belt it is.

Nissan OEM Belt is $86 + GST.

I'd take you up on the offer for the belt but i'm in Melb and much easier for me to just go to my local Nissan dealer. Thanks anyway.

Interesting...

I had a Nismo Timing Belt when it came with the car, it seem to have run fine.

So down the long run of a Nismo Timing Belt, would it cuz issues?

Reason I changed back to the Nissan OEM belt is cuz I did not know how many K's the Nismo one had done, so to be on the safe side, I wanted a decent item and genuine was the way to go IMO.

So Nissan OEM belt is a winner!

straight from the horses mouth: racepace recommend the Nissan OEM belt. The Nismo one is apparantly too strong and in theory doesn't allow enough flex to account for expanion of the motor when it warms up. Good enough for me OEM belt it is.

Nissan OEM Belt is $86 + GST.

I'd take you up on the offer for the belt but i'm in Melb and much easier for me to just go to my local Nissan dealer. Thanks anyway.

Hehe, i linked you straight to Bens post on the matter. (pretty sure that was his account)

On another note, what do u guys reccommend for interval in years,   subie and puegeot recc 4years.  I believe toyota is happy with 10years

I dont think nissan has a year interval.  I do mine every 8years

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...