Jump to content
SAU Community

Recommended Posts

What parts should be changed when rebuilding a motor to run at the stock 7psi? I just want it to run well seeing how it has over 150k on the motor, I searched but only found engine builds that will have monster hp, I just want to get mine running smoothly and reliable before adding more expensive parts for more power

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/
Share on other sites

if its just to run 7psi, and it only has 150k on it i wouldnt bother, just keep saving your money for a proper rebuild if you plan to do it.

some items you MIGHT want to replace though, gaskets, hoses, piston rings, make sure your valves are sealing and arnt carbon'd up.

how far down the track did you want to put more power into the engine? what engine?

how much money were you wanting to spend on this engine build (refresh)??

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907562
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

Edited by DosuGTR
Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907906
Share on other sites

well when you get it, change plugs, fuel filter, have a look at the brakes, check all suspenion bushes. just give the car a good check over in general, if the majority of things look good then you should be fine.

dont thrash it stupidly and itl last for a while. but since ur only just getting it...you'l thrash it haha.

just see how it feels and looks before you start organising a rebuild. 26builds arnt cheap...

where are you located?

CJ

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3908588
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909087
Share on other sites

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

sorry mate but he's right. engine rebuilds are only if you need it. your gonna need your cash for everything that breaks down on them. keep a stash for when that happens

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909333
Share on other sites

have you had a GTR before? realize how much power they have stock? you can easily get 300awkw out of a GTR with simple cheap and easy mods like exhaust turbos and boost. if its got the 150,000 on it then maybe it already has had the pumps replaced. you would find it a lot cheaper to do a 100000km service then to rebuild the whole motor

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909338
Share on other sites

well in that case, maybe you are better off replacing the brakes and rotors, new suspension. while you are there, replace the bushes.

the interior would be on the way out by now as well, so order new plastics, seats and carpets.

seals around the windows are getting a bit weary, and you don't want them blowing out while you are doing a 300kmh plus pass down to the local shops, so replace them, along with basically anything else that is over 12 months old...

maybe just buy a new gtr...?

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909624
Share on other sites

Well I figured alot of these imported skylines were beaten on so its better safe than sorry

Dude, if the WORST happens and your motor lets go, you'll be up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

If you want to make sure that doesn't happen, you're up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

Safe = $6k, Sorry = $6k.

There is no point in doing what you're saying. You're better off changing the oil ever 1500kms like most do and hoping it doesn't spin a bearing (good luck!).

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909652
Share on other sites

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Or buy one with an already rebuilt motor, or buy one with a popped stocker motor with the plan to rebuild it. No gambling this way, know what you are getting.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909700
Share on other sites

yeah just go with it for now. main thing is to give it a good service (eg all new fluids - there are a lot in a gtr.....) and don't turn the boost over say 12-14psi. You should be fine, and if not you are in for that rebuild anyway :blink:

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3910330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...