Jump to content
SAU Community

Recommended Posts

What parts should be changed when rebuilding a motor to run at the stock 7psi? I just want it to run well seeing how it has over 150k on the motor, I searched but only found engine builds that will have monster hp, I just want to get mine running smoothly and reliable before adding more expensive parts for more power

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/
Share on other sites

if its just to run 7psi, and it only has 150k on it i wouldnt bother, just keep saving your money for a proper rebuild if you plan to do it.

some items you MIGHT want to replace though, gaskets, hoses, piston rings, make sure your valves are sealing and arnt carbon'd up.

how far down the track did you want to put more power into the engine? what engine?

how much money were you wanting to spend on this engine build (refresh)??

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907562
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

Edited by DosuGTR
Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3907906
Share on other sites

well when you get it, change plugs, fuel filter, have a look at the brakes, check all suspenion bushes. just give the car a good check over in general, if the majority of things look good then you should be fine.

dont thrash it stupidly and itl last for a while. but since ur only just getting it...you'l thrash it haha.

just see how it feels and looks before you start organising a rebuild. 26builds arnt cheap...

where are you located?

CJ

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3908588
Share on other sites

Sorry, rb26dett, Im getting the car next week(cant wait!) and I dont want anything to happen to it in the first month of driving it. well in the future my goal is 450-500whp. mostly for weekend driving and the track for fun

well it says 150k, and could of been driven really hard, not taken care of and rolled back too

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909087
Share on other sites

So you want to rebuild it once to suit 7psi and basic power, and then rebuild it again later for 450-500rwhp?

You obviously don't know how much the labour/machining/necessary parts costs for a rebuild... it's BIG money.

sorry mate but he's right. engine rebuilds are only if you need it. your gonna need your cash for everything that breaks down on them. keep a stash for when that happens

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909333
Share on other sites

have you had a GTR before? realize how much power they have stock? you can easily get 300awkw out of a GTR with simple cheap and easy mods like exhaust turbos and boost. if its got the 150,000 on it then maybe it already has had the pumps replaced. you would find it a lot cheaper to do a 100000km service then to rebuild the whole motor

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909338
Share on other sites

well in that case, maybe you are better off replacing the brakes and rotors, new suspension. while you are there, replace the bushes.

the interior would be on the way out by now as well, so order new plastics, seats and carpets.

seals around the windows are getting a bit weary, and you don't want them blowing out while you are doing a 300kmh plus pass down to the local shops, so replace them, along with basically anything else that is over 12 months old...

maybe just buy a new gtr...?

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909624
Share on other sites

Well I figured alot of these imported skylines were beaten on so its better safe than sorry

Dude, if the WORST happens and your motor lets go, you'll be up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

If you want to make sure that doesn't happen, you're up for a minimum $6000 rebuild (incl. labour, but mostly stock parts).

Safe = $6k, Sorry = $6k.

There is no point in doing what you're saying. You're better off changing the oil ever 1500kms like most do and hoping it doesn't spin a bearing (good luck!).

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909652
Share on other sites

If you want to be assured your car wont break down in the first few months of ownership, don't buy a GT-R.

Or buy one with an already rebuilt motor, or buy one with a popped stocker motor with the plan to rebuild it. No gambling this way, know what you are getting.

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3909700
Share on other sites

yeah just go with it for now. main thing is to give it a good service (eg all new fluids - there are a lot in a gtr.....) and don't turn the boost over say 12-14psi. You should be fine, and if not you are in for that rebuild anyway :blink:

Link to comment
https://www.sau.com.au/forums/topic/221600-engine-rebuild/#findComment-3910330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...