Jump to content
SAU Community

R32 Gtr In Rwd

DS-ZILR
 Share

Recommended Posts

DS-ZILR Collaborator

DS-ZILR

Posted
Posted

Gday crew wonderin if by running my gtr in rwd not 4wd will do any damage to any components of the car in particular transfer cases atessa system etc?

I have air in the atessa system at the moment and am changing the clutch soon so wont bleed it till that is over, just want to check that im not doing any harm at the same time.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/222083-r32-gtr-in-rwd/
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted
Yerrrp a good thing to remember ABS will also be disabled!! not the best in this wet weather!

Your popping the wrong fuse..

Are you popping the one in the car, on the right of the steering wheel?

If you take out the one in the little kicker pannel on the right of the steering wheel, it will disable both ATTESSA and ABS

Try taking out the one from the engine bay.. I havent had any problems with ABS being disabled with that one..

In terms of conflicting stories is that you can't do the same with R33's and R34's GTR's. Thats where it gets blurry.

With R32's its fine. I have run my GTS4 for long periods of time in RWD and have heard many stories of GTR's being run in RWD aswell for long periods of time without any problem.

If you take out the fuse, you make the ATTESSA circut incomplete. If it is incomplete, it will not sence the diffrence in G forces (which is what activates the front wheel torque) and will not engauge the transfer case and hence, front drive shaft, diff and wheels.

Link to comment
https://www.sau.com.au/forums/topic/222083-r32-gtr-in-rwd/#findComment-3914387
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

GTS4WD is spot on. there is no need to disable ABS to disable the AWD. the reason people do is that they are lazy and just remove the fuse from the in cabin fuse panel. if you remove the AWD fuse from the engine bay all it disables is AWD. ABS is left intact. and no it won't harm your R32 GTR to do it.

Link to comment
https://www.sau.com.au/forums/topic/222083-r32-gtr-in-rwd/#findComment-3914665
Share on other sites
heller44 Mentor

heller44

Posted
Posted
GTS4WD is spot on. there is no need to disable ABS to disable the AWD. the reason people do is that they are lazy and just remove the fuse from the in cabin fuse panel. if you remove the AWD fuse from the engine bay all it disables is AWD. ABS is left intact. and no it won't harm your R32 GTR to do it.

Just thought i might add a mention to this..

Rmoving the fuse in the cabin removes power to the attessa/abs ecu, removing the fuse in the engine bay removes power to the attessa pump motor. This also means that you can't just come to a stop and jam the engine bay fuse in, like you can with the cabin fuse, and expect awd to come back.. Engine bay fuse requires a shutdown of the electrical system and firing it up again as you have driven the awd/abs ecu into a fault condition, it needs a reset to go again. (more pertinent to those that have switches rigged up).

Link to comment
https://www.sau.com.au/forums/topic/222083-r32-gtr-in-rwd/#findComment-3918658
Share on other sites
heller44 Mentor

heller44

Posted
Posted (edited)

Ahh, nope.

Even with a switch rigged into the fuse line in to the attessa ecu (in cab fuse one) you still have to be at a standstill for it to reset, otherwise it will fault.

Another way of faulting the atessa ecu is to turn the electrics off and then back on whilst still moving.

Edited by heller44
Link to comment
https://www.sau.com.au/forums/topic/222083-r32-gtr-in-rwd/#findComment-3920981
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...