Jump to content
SAU Community

Recommended Posts

hey guys,

car is going into the shop for some paint approximately three weeks from now...

kit is arriving (or should do) by the end of next week...

so, to cut a long story short;

my car is white (whole car) and i was thinking about doing a typical 'Panda' spec style coordination with my car, the thing is... i don't know what to paint black!!!

i know for certain that my wheels are getting painted black, they are already chrome with a tiny bit of lip and i will leave the lip polished but paint all the spokes, from this;

http://www.californiacustoms.ch/cc/images/z18.jpg

to this;

http://www.fwt.net.au/store/images/P/tn_zinik_z18_blk-01.jpg

my initial idea was to paint the mirrors (already Carbon Fibre Ganadors that i'm picking up tomorrow) black, the Vented Bonnet black and the Bootlid black (not the whole boot, just the top part... kind of like the Mine's R34 GTR) as seen here;

http://images.superstreetonline.com/featur...e_rear_view.jpg

then i thought the car would look funny if the mirrors were black and the roof was white so i thought i might paint the mirrors and the roof black and leave the bonnet and the boot white with the rims still how i want them...

THEN i considered doing the bonnet, roof, mirrors AND boot black and then probably have to do a two tone kind of thing and have the top half of my car black divided by a nice stripe of some sort... (the strip would be above the door handle) possibly airbrushed on, again with the rims still black...

i was just wondering what kind of opinions you could all give me as i would really appreciate what you guys out there think is 'hot' and what is 'not' and before i finish off i KNOW that there will be many comments (maybe less now that i mention it) that the car is mine and i should do it as to how i please but the thing is i'm unsure, all these options have run through my mind and i just want to see how other Skyline enthusiasts weigh up such choices...

all comments will be GREATLY appreciated though i would like to see negative ones at a minimum...

i will state however that the option at the top of my list was my very first thought to just paint the bonnet, bootlid, mirrors and wheels...

(and if it makes a difference at all, i'm still remaining with the URAS kit... mine now is just a bit banged and scratched up and EVERYTHING!)

let the comments begin!

Andrew :ermm:

Link to comment
https://www.sau.com.au/forums/topic/223299-paint-for-autosalon/
Share on other sites

oh about that Rhys...

i think i'll be going to your's, i don't have any tools, or a garage that has enough room to do any work :wacko:

and Hamish... yeah they are CF but i think they will stand out too much (up-close) compared to the black...

if only i could afford CF Bonnet and Boot, then i'd keep it CF but a full time uni student that's just quit their job = no $$$

keep em coming folks

Just seems a bit of a waste to paint over CF Ganadors as they arent actually lighter or anything, its just CF look anyway. But if youre getting em 2nd hand or on the cheap then no harm I guess :wacko:

I reckon paint the rims and if you want then do both the boot and bonnet but definitely dont paint the roof. It might look good on silvia's but I think it looks weird on a 33.

Edited by Yawn

getting brand new ones, super cheap...

everyone is telling me to keep them CF so i think that's what i might be doing...

i drive an R34... has a sharper roof than the R33?

well looks like i might exclude the roof unless i do the top half of the car...

thanks for the opinions Mike, as for everyone else that hasn't commented, please do...

looking forward to seeing what you guys have to say, cheers,

Andrew

That looks sweet, lol, there is a pioneer demo car that is an R34 with a blue top half and white bottom, and has hand painted lines to divide it, if i get the time ill upload some pics

Just seems a bit of a waste to paint over CF Ganadors as they arent actually lighter or anything, its just CF look anyway. But if youre getting em 2nd hand or on the cheap then no harm I guess :banana:

I reckon paint the rims and if you want then do both the boot and bonnet but definitely dont paint the roof. It might look good on silvia's but I think it looks weird on a 33.

i think im possibly with Yawn on this one though, that would look hot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...