Jump to content
SAU Community

Recommended Posts

hi ive got a gtr r32 recently rebuilt engine forged piston ect.just purchaced garrett 2860-5,power f, nismo fuel pump,

nismo afm ,sard 700cc injectors not installed as yet. just wondering what cams to put in any advise would

be much appreciated car is used only for steet, after responce as well as power :domokun:

anything else that i should do? am hoping to make over 300awk.

with -5s if you aren't making 370rwkw there is something really wrong.

300rwkw is not even trying with those turbos.

As for cams - im bias and i'd say stock, others will say aftermarket... depending on who works on the car/knows tricks and so on will dictate if you need to spend coin there or not.

Plenty of threads on it now

hi ive got a gtr r32 recently rebuilt engine forged piston ect.just purchaced garrett 2860-5,power f, nismo fuel pump,

nismo afm ,sard 700cc injectors not installed as yet. just wondering what cams to put in any advise would

be much appreciated car is used only for steet, after responce as well as power :)

anything else that i should do? am hoping to make over 300awk.

You must have broken your piggy bank........ :)

As suggested......depends on your tuner.

Some can get good power and response from stock......

I have the same set up as what you will have......

These are the cams I have

143036 A Type + 153027 Cam Pulley Nissan BNR32/BCNR33 RB26DETT Duration IN 260, EX 252, Lift 9.15 (Pon Cam + Cam Pulley IN & EX) AU $ 832.67

These Cams also work with the stock computer...and the only ones in the market place that do.

I have a better response after the install and greater torque.

Do a search and read as much as you can......Other parts may need changing when this is installed.

Good luck.

You must have broken your piggy bank........ :P

As suggested......depends on your tuner.

Some can get good power and response from stock......

I have the same set up as what you will have......

These are the cams I have

143036 A Type + 153027 Cam Pulley Nissan BNR32/BCNR33 RB26DETT Duration IN 260, EX 252, Lift 9.15 (Pon Cam + Cam Pulley IN & EX) AU $ 832.67

These Cams also work with the stock computer...and the only ones in the market place that do.

I have a better response after the install and greater torque.

Do a search and read as much as you can......Other parts may need changing when this is installed.

Good luck.

Thanks heaps all for advise much apreciated crd will be tuning it. Can anyone tell me if there is any differance apart from price between the jun 260deg 9.15 lift and the tomei same spects?thinking of going one of them unless anyone has beter suggestion?done heaps of searches and can find much on differances between the two.

Thanks heaps all for advise much apreciated crd will be tuning it. Can anyone tell me if there is any differance apart from price between the jun 260deg 9.15 lift and the tomei same spects?thinking of going one of them unless anyone has beter suggestion?done heaps of searches and can find much on differances between the two.

What was the point of this thread...you have already made your mind up.

most of the advice given was stock cams which WILL work better on your set-up. I know personally of one particular car with almost an identical set-up that had much better response when changing back from the cams you mentioned to stockers and only lost a couple of KW's in the topend as a result.

I know how convincing CRD are when advising you to use a product they sell. (I had been a customer of theirs for 6 years)

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...