Jump to content
SAU Community

Recommended Posts

efforts from the other nite on new coilovers... surprised how well the 12's tucked in under the guards.

th_untitled1copy.jpg th_loowwww.jpg

will try get some better pics later on... still working the rear guards then gonna need a bit of bogging :)

Edited by SkyHi_33
a ticket on one of these...

Airbus-A380-59.jpg

... to here...

canada.jpg

... should do the trick.

nice.. my sister just got back from a 6 month trip from canada down to new orleans and back up to canada

took her 6 months and cost a tonne but she has no regrets at all...

that said, i think ur map is wrong

American%20Map%20Of%20the%20World.png

Much better

-D

True, nice fitment, but this is a prime example of the first cop that comes up behind you at the lights tears you a new one and defects you. No ifs, ands, or buts.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc...4_3114186_n.jpg

You should see them on the R32 J-Rad sold :thumbsup: looks dope, althought I don't know how he hasn't been defected for the fact their out the guard, got done for bald tyres though once. Hes a good mate of mine, as with the R33 up top.

Whats the point of worrying about if your tires are legal? I got defected for the XD9 because they had stretched tires on them. They were in track still but I still got done. So there is no point in not getting the wheels you want because "as soon as a cop sees them your gone" because he'll just find something other than your wheels to get you for.

Yeah but in nearly 10 years of driving a 200rwkw S15, 230rwkw R34 and now 170rwkw V35 I have NEVER been defected. All I hear are all the 'victims' crying waaaaa, waaaa, waaaa I am defected again .... I just avoid it by not being obviously defectable.

But hey, some people get away with it .... and I did love those XD9s (and would have bought them if the fronts were slightly tougher offset and they were a different colour).

Yeah but in nearly 10 years of driving a 200rwkw S15, 230rwkw R34 and now 170rwkw V35 I have NEVER been defected. All I hear are all the 'victims' crying waaaaa, waaaa, waaaa I am defected again .... I just avoid it by not being obviously defectable.

But hey, some people get away with it .... and I did love those XD9s (and would have bought them if the fronts were slightly tougher offset and they were a different colour).

Everyone goes 'waaa waaa waaa' when they get defected, I'm not going to lie I did too. But its just what comes with these cars now, so I'm not going to mod my car with the idea "oh no I'll get defected for that' (obviously I'm not gonna roll around with a hi mounted T51R SPL or something) but a even a standard 32/33 GTR won't pass the DB test.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...