Jump to content
SAU Community

Recommended Posts

Different people have different opinions - I don't see it's any reason to get upset or start slinging insults around.

Some people don't see a point in the 'stance' or 'big camber' movement, whilst others love it. At the end of the day, it's just a thing of personal taste - though I can see how Dohmar's reply could be seen as a criticism or personal attack.

Pic shown was clearly on a public road. One would assume that the car is a street car, setup for that whole bosuzoku camber-as-f**k scene. Which has nothin to do with performance. If you had a pic of that car with that camber on a track, I wouldn't be asking questions as I can appreciate camber on a track car, but in all the professional racing (ie not drift) they have sensible camber - one where it maximises the contact patch, not deliberately making the camber so negative that it reduces the lateral grip.

So yes, *Excessive* camber is dumb. Maybe ya'll got a different definition what is excessive but from my narrow minded opinion, cars were meant to grip around corners (I do admire drift dont get me wrong but its an entirely different train of philosophy to 3/4's of car events - that being grip is good, slip is bad). Practical camber? You want it for a road vehucle, a drift vehicle, a time attack vehicle or a drag car? Apples aint apples. And yeah from that pic, it looks totally over the top... not having a dig at your setup if it is a proper drift car but

Nice to see Weezy is still a spineless stooge who runs 0 camber... as per last time :)

-D

EDIT - And yes, I was a tad undiplomatic - thats a dope photo no doubt about it, I just ask myself WTF when I see that much camber on a street car

sorry,

but in all the professional racing (ie not drift) they have sensible camber - one where it maximises the contact patch, not deliberately making the camber so negative that it reduces the lateral grip.

i'm sorry, but i think you've got your wires crossed, generally what limits negative camber, is braking, not lateral grip. for example v8 supercars run -5.5 camber, if this falls within your definition of sensible camber, then mine must almost fall under the same category. only a few years back a few teams were experimenting with -7, but had issues with braking, generally anything after -6 your braking performance begins to fall off, up to that you're generally only helping your times by increasing lateral grip, obviously there are other factors to consider, different tyres and suspension types, but i'm not going to get into that. drifting we require front grip, however our geometry is flipped on itself as we carry through a corner with opposite lock, and due to the amounts of steering angle compared to that of a car under grip conditions, the static camber has less of an effect due to the caster angle and SAI's effect on dynamic camber, and the fact that static camber has less and less of an effect the more steering angle there is.

2ndly, not sure how a car being driven on the street automatically leads to the assumption that it never gets driven on the track :S

sorry,

i'm sorry, but i think you've got your wires crossed, generally what limits negative camber, is braking, not lateral grip. for example v8 supercars run -5.5 camber, if this falls within your definition of sensible camber, then mine must almost fall under the same category. only a few years back a few teams were experimenting with -7, but had issues with braking, generally anything after -6 your braking performance begins to fall off, up to that you're generally only helping your times by increasing lateral grip, obviously there are other factors to consider, different tyres and suspension types, but i'm not going to get into that. drifting we require front grip, however our geometry is flipped on itself as we carry through a corner with opposite lock, and due to the amounts of steering angle compared to that of a car under grip conditions, the static camber has less of an effect due to the caster angle and SAI's effect on dynamic camber, and the fact that static camber has less and less of an effect the more steering angle there is.

2ndly, not sure how a car being driven on the street automatically leads to the assumption that it never gets driven on the track :S

I live in adelaide. My bad. Cops ever saw that camber here in adelaide you'd be having some srs difficulties. You'd probably know this already

Also, ur pic makes it look like ur running 10+ degrees, Its nice that you fill out those camber details for us novices to take in, cause now I've learned something and have something to compare it against. My knowledge is all from grippage and not drift, so my apologies for being off the mark - what you posted is excellent.

End is, I dont think that theres any circumstance that I would run that much camber. Me not being a drifter and that.

And as to my first post - yes - as JRM said, it was cosmetic - it just looks dumb IMHO (unless you're the 0.05% population that is well versed in the lore of drift)

-D

we'll have to agree to disagree, if i had a time attack car where i found the optimal setting was -6 degrees camber, i'd happily run that on the street, even if some people thought it looked silly, at the end of the day, what's a little tyre wear on the street compared to improved lap times out on the track?

we'll have to agree to disagree, if i had a time attack car where i found the optimal setting was -6 degrees camber, i'd happily run that on the street, even if some people thought it looked silly, at the end of the day, what's a little tyre wear on the street compared to improved lap times out on the track?

Guess that all depends if you're a racer or just a dude who drives it as a daily

-D

Guess that all depends if you're a racer or just a dude who drives it as a daily

-D

You love arguing on the interwebz don't you lol.

Oh to have as much spare time on my hands as you do

  • 2 weeks later...

What was the event run like, how many runs did you do, did you get to line up against whoever you wanted/or was it more structured? I might have to take the V35 whale out next time and see if I can crack a 13.XX :)

It was run ok imo, the only hold ups were when a few cars leaked fluid on the start line. I got 8 runs in from 10am till 6pm with a fair few breaks between, i think that was reasonable considering there were 160 cars registered. Would of been nice to have the line up more arranged,we got in line and didnt know who we were up against until we got to the front, you could try count but some cars would pull out or be tow cars, 'Jap Star' and I were 1 car apart a few times. Drag day on the cards for SAU ;)

The 12.3 was with Yokohama semis on 15psi, launched at 3-3500 with no spin. Also made a 12.6 with Dunlop street tyres at 3000rpm with minor spin in 1st and 2nd. Dropping the psi and doing a decent skid helped reduce wheel spin massivly on the street tyres.

The 12.3 was with Yokohama semis on 15psi, launched at 3-3500 with no spin. Also made a 12.6 with Dunlop street tyres at 3000rpm with minor spin in 1st and 2nd. Dropping the psi and doing a decent skid helped reduce wheel spin massivly on the street tyres.

great time bud excellent for stick infact what power u running?

1.9 is really good bud with a manual, it sounds funny but the 60 is the hardest part 1.7 in a manual is going to take alot of mechanical abuse if it hooks up lol good fun trying tho 1.7 would take u to a 11.94 , may need same launch but just a few more horses to get u there

some blokes in autos cant make a sub 2.0 60 so u done real well

Edited by JETURBO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...