Jump to content
SAU Community

Recommended Posts

hey guys got my turbo put on, all tuned on 16.5 psi running 251rwk with all supporting mods.

the turbo does hold boost but as soon as u hit 5,000rpm it just hesitates and drops off to 5 psi. can hear a hiss but cant find it.

took my car for a drive tonight and didnt feel as strong at higher rpm.

boosted it again and it got way worse. in 3rd gear soon as i hit full boost car feels like the brakes are being applied and wont rev anymore.

the first couple of times when its just warming up is fine then it does it. boost was dropping down to 4-5 psi.

turbo is new. checked all my hoses and inspected the turbo and its perfect still.

only thing i can think of what i did last week i wasnt paying attention and i ran up a rounded gutter and cracked my front bar. been doing it since then. few days ago

Edited by R33GOD
Link to comment
https://www.sau.com.au/forums/topic/224398-need-help-r33-gtst-related/
Share on other sites

i have a blitz bov. its atmo

these are my mods

stock internals

hiflowed ball bearing turbo 450hp

splitfires

pfc

blitz fmic

tomei pump

600cc injectors

z32afm

stock intake pipe with k&n air panel filter

full 3in exhaust.

hid boost controller

Edited by R33GOD

have you checked all your pipework? sounds like a leak from something.... try getting under the hood and flicking the throttle cable see if you can hear where the leaks coming from.... as for the car feeling like the brakes have been applied that souds like saftey mode so you dont blow it up....

ok fixed the hose problem but it still drops off boost sometimes.

it only does it when its been thrashed after about 6 times or so.

spoke to my tuner and he thinks it could be my hdi boost controller solenoid getting way too hot. or an actuator issue?

thoughts and experiences if anyones had a ebc prob or actuator prob?

today i further inspected the problem and still couldnt find the prob.

so far i have done a boost leak test.

changed boost controllers

took off front bar inspected cooler and silicon piping

changed all boost line hoses from actuator.

only thing i can think of is maybe the intake pipe is sucking closed.

cause it only does it when u hit the throttle hard on down gear, or at top end as i change hard into 4th. and sometimes 3rd

Edited by R33GOD

it does sound like a boost leak coz at high rpm it drops but if it was it would have given way and popped off hope u work it out! Try connecting a hose straight from the wastegate to the intercooler piping and see what it does then?

ive done everything and soon as the car gets hot after a couple of runs its still doing it.

i done rev210's intake pipe mod also, so i dont know what to do.

only thing i can think of is not enough preload on the actuator. its set to half a hole at the moment.

another theory. if i have faulty plugs and when the car gets real hot would it cause less combustion thus the major boost drop?

mate i had simular prob wif my gtr first noticed it on a trip to melb hit full boost than dropped to half and it would only half boost up after that untill i restarted the car then it was normal again its happined about 3 times now but they have been on really hot days so i just thought it was the ecu in safe mode or something

I'd be doing another boost leak test - if you ran up a gutter and cracked your front bar youve proabbly done somthing to your FMIC or piping. Stick a can of baked beans in the intake and pump it up with an air compressor. make sure you go under the car to listen for leaks too.

I'd be doing another boost leak test - if you ran up a gutter and cracked your front bar youve proabbly done somthing to your FMIC or piping. Stick a can of baked beans in the intake and pump it up with an air compressor. make sure you go under the car to listen for leaks too.

ive taken the fmic out completely and inspected the piping and tanks. they are perfect

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...