Jump to content
SAU Community

Recommended Posts

On a side note, if anyone is interested in a group buy for Royal Purple products in Victoria, I've started a thread in the vic section. If there is enough interest I'll organise it, but I'd rather keep it vic only, as it'd be much easier to keep track of, and other states seem to be able to find RP products easily enough.

On a side note, if anyone is interested in a group buy for Royal Purple products in Victoria, I've started a thread in the vic section. If there is enough interest I'll organise it, but I'd rather keep it vic only, as it'd be much easier to keep track of, and other states seem to be able to find RP products easily enough.

How much per quart and min qty required? any more details?

  • 2 weeks later...

cogs, depends on your budget. But something like Castrol Magnatec or Mobil Synth S would do the job.

CCCP, Personally I would say take it back and buy the EDGE 5W30 instead. The 10W60 is pretty damn thick for a stock motor on the street.

cogs, depends on your budget. But something like Castrol Magnatec or Mobil Synth S would do the job.

CCCP, Personally I would say take it back and buy the EDGE 5W30 instead. The 10W60 is pretty damn thick for a stock motor on the street.

I thought its only for modern 4Cyl engines... anyway i ent back and got 5W30! Thanks :laugh:

LOL yes thats what the bottle says but they are just marketing it towards the ricers. Most new cars, 4 cyl or V8s run 5W30s/10W30s these days! In the USA the oil of choice is now the 5W20.

I am currently running Shell Helix 5w40... should I see much fuel economy/better response now that this new oil will be thinner?

You may or may not feel it. Some claim there is no difference. Others comment that a 40wt feels sluggish compared to a 30wt, especially for those who live in cold climates. Different people with different cars... so no guarantees but its definitely not a bad thing! Let us know how it goes...

  • 2 weeks later...
what can thick oil do to your car?

It will cause too much startup wear, once heated up to operating temp there's actually not much difference between a 30wt to a 50wt...

For example let take a look at Mobil 1 0w30 when compare to Mobil 1 15w50EP.

M1 0w30

cSt@40'c = 63.1

cSt@100'c = 11.0

M1 15w50EP

cSt@40'c = 138

cSt@100'c = 18

So at 40'c ambient summer temp, during startup the 0w30 will flow 118% (74.9cSt thinner) faster then the 15w50 but at operating temp the 0w30 oil is only about 7cSt thinner then the 15w50.

Edited by Trex101

There's a major factor people forget with oils and thats environment temperature. After speaking to a guy from motul the 10w-40 is meant to be only good if the temperature is 5-35 degrees and the 15W-50 is for use in 15-50 degrees. So for people in the hotter areas of australia where an average summer day is usually above 35 degrees the 15W-50 would be better. I know people have said that the 10w-60 is not good for street use, and that may be true as the oil doesn't get as hot (compared to track use), but for those in the hotter areas, the oil temp does get up above what it normally would and to save using one oil for winter and one for summer the 10w-60 does cater for all seasons.

There's a major factor people forget with oils and thats environment temperature. After speaking to a guy from motul the 10w-40 is meant to be only good if the temperature is 5-35 degrees and the 15W-50 is for use in 15-50 degrees. So for people in the hotter areas of australia where an average summer day is usually above 35 degrees the 15W-50 would be better. I know people have said that the 10w-60 is not good for street use, and that may be true as the oil doesn't get as hot (compared to track use), but for those in the hotter areas, the oil temp does get up above what it normally would and to save using one oil for winter and one for summer the 10w-60 does cater for all seasons.

It used to be true ambient temperature does plays a big part in old air cool engine but modern water cool engine oil temp just doesn't fluctuate that much be it in summer or winter condition. If you have an accurate after market oil temp gauge, you will find that the temp is pretty constant be it in 0'c or 50'c ambient.

Motul 300v 10w40

cSt@40'c = 89.5

cSt@100'c = 14

VI = 161

Motul 300v 15w50

cSt@40'c = 128.1

cSt@100'c = 17.8

VI = 154

Actual oil temp directly affect the final viscosity, so depends on your avg oil temp and target viscosity needed. You can accurately choose your choice viscosity.

Use the calculator to calculate the Vis at difference oil temp

Viscosity Calculator

Hey Guys

I been using Elf 10w-50 in the R32 gts-t for the past 2 oil changes now and it has been running smooth.

bout $50-$60 a bottle i think, of 5 ltrs from autobarn, not 100% sure though.

No real issues, warms up nicely, does the job, engine runs nice, doesnt overheat

This oil was used on the recomendation of bel garage.

just my 2c

:(

There's a major factor people forget with oils and thats environment temperature. After speaking to a guy from motul the 10w-40 is meant to be only good if the temperature is 5-35 degrees and the 15W-50 is for use in 15-50 degrees. So for people in the hotter areas of australia where an average summer day is usually above 35 degrees the 15W-50 would be better. I know people have said that the 10w-60 is not good for street use, and that may be true as the oil doesn't get as hot (compared to track use), but for those in the hotter areas, the oil temp does get up above what it normally would and to save using one oil for winter and one for summer the 10w-60 does cater for all seasons.

maybe he needs to move into the 20th century...cars are water cooled now LOL oil temp doesn't fluctuate nearly as much anymore under normal driving conditions, i.e. street.

also that has been covered already..so it hasnt been forgotten

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...