Jump to content
SAU Community

Recommended Posts

Snap.

After endless "best oil" searching and no discernable conclusion looking likely , ever, I went with a Valvolene 10-30 semi syn which behaved like flushing oil when hot according to my oil pressure gauge so I rissoled it after 20ks and having read every oil bottle label in Autobarn that seemed remotely relevant I to decided on the Nulon 10-40 fast flow fullsyn and so far it's looking good, nice hot /cold oil pressures and the engine sounds comfortable.

Not at all technical but seems as good a yard stick as many I've read.

:rolleyes:

+1

Been running nulon 10w40 full syn for 2 years now and I'm also happy with it. I changed oil and filter every 5000k, then after rebuild did it every 3000k, and straight after track days. Also happy with cold and hot running pressures and engine is smooth.

i have a 2000 r34 gtt, manual with 80,000km and was after some gearbox oil, ive looked for a long hard time and are having trouble making sence of things.

i just want to know what to get? how many litres and how much roughly it is, im in vic, eastern suburbs

Also was looking at castrol motor oil for the engine but they dont offer a full synthic 5-40w?

Hmm fair enough. I'm pretty sure the Motul rep we used to have said 4100 was a group III. I also got told Motul don't make anything below a group III, yet on that list it lists a group II?

whoever told you is wrong we only NOW make group 4 oils and up as we discontinued all our 400 motion and 2000 mineral range in package line

http://www.motul.com.au/product_line_up/4s.../4stroke20.html

That clearly states that 4100 is a semi-synth

well it is in acea (European) standards as thats what Motul go by as to them anything but 100% synthetics are semis it's quite complicated .......

  • 2 weeks later...
I'm using Castrol Formula R 5W-30 (full synth). It costs $50 for 5 litres from Auto 1.

Edit: I no longer use the above oil. Not so much for the thickness of the oil but mostly because I think it's hell dodgy for a synthetic oil. I gave up using Castrol long ago.

Do a search, The engine oil bible, it's worth a read.

There is tons of stuff on the web when it comes to oil.

Can anyone help me?

My car is just a fairly stock 33 gtst(just got exhaust and a pod filter). It is never tracked and isnt driven much harder than the average prius, though I very occasionally engage in a bit of spirited driving. Most of my trips are quite short though average drive would be about 5km. I am about to do the first oil change on it since my ownership which is ~8500kms since last owner did it.

Which oil should I be using, preferably would like something not too expensive, $80 for 5L would be about my limit if possible. I was thinking also 10w40 grade? is this good for the application. Also would like to know where I can buy some decent oil in perth as I cant find anything other than just basic supercheap auto stuff

If its a stockish R33 GTST and your changing often you could go a cheaper oil, Performancelub (see signature) sells quality oil with cheap shipping.

I personally use German Castrol 0w30 in a GTR and it was good, I'm also trying Amsoil 10w40 although its a little more expensive.

hey all

i stupidly picked up some Mobil 1 0w40 oil for the R34 the other day (after being told any decent synthetic will do). now im being told it could be too thin for the engine

so should i take it back and get something like 5w or 10w?

as far as im concered.. the lower the cold weight the better....

u want thin oil at start up = fast lubrication of the engine and its not like you will trash the car when its cold.

Whoever told you its too "thin" doesnt know what they are talking about.

btw the difference between 0 and 5 is literally nothing.

I Currently use Motul Turbolight 4100 10w40 in my R32 Gts-t for day to day driving and am very pleased with it... :cool:

But I want to start some track/drift work :banana: so,

What viscosity Motul oils do you guys recommend for track use?

you' be surprised how many mechanics, shop assistants etc will tell you that a 5w or 0w oil is "too thin" for an RB motor.

Probably is for an rb30 or an old redtop rb20. My rb30s and old rb20 both leaked when using 5-40 fully synth. When I put 10-40 semi synth in them they stopped burning and leaking oil.

Protection wise theres no such thing as too thin oil, but on an old motor with poor tollerances too thin oil will leak and get in places it shouldn't.

Edited by Rolls

hey guys just about to do a motor oil change and last service i used castrol. but was looking for a change.. seen today the nulon looked decent.. anyone have any recommendations on whats worth a good go..

i own an r32 gtr pushin 300kw+ or thereabouts at wheels.. its now daily driven and also gets a decent revvin here and there :)

oh and its done just over 80000ks..

cheers

Corey

  • 2 weeks later...

I know nothing about oils and have no mechanical qualifications outside of , I hope , common sense and 45 years of driving experiance and DIY servicing .

After reading a shit load of posts it would seem to me the problem is one that is inherant with the RB engines and that is that the pump shoves all the oil into the top of the block/head and as the oil can't drain back fast enough so the bottom end 'can' starve resulting in spun bearings and all sorts of mischief.

Basicly what this would seem to mean in a practical sense is that an engine that should be good on 15x50 in summer and 10x40 in winter (never mind the syn v dino atm) actualy has a manufacturers spec of 7.5 x 30 so that it's thin enough to actualy drain back and not cause bottom end starvation , what a crock, 7.5 x 30 what were they thinking ?

Living in SE Qld I am lucky enough to not to have to worry to much about wildly excesive high/low temperatures,sure we get a couple of chilly ones and a few hot ones so good ole common sense says to me no floggy when too hot/cold.

As the average ambient temp is consistantly higher here that the manufacturers would have likely planned for in most of these cars I have gone for 10 x 40 Nulon Hi Flow Full Synthetic (as I posted previously) .

The price is good, the oil specification seems on the money and the results seem fine with a good hot/cold oil pressure, smooth running engine and a fuel consumption of 13.3ltr 100klms.(98 R34GTT)

I now wait with baited breath for someone to shoot down my methodoligy :D

Corey is that a genuine 80,000kms or is that just what the speedo says?

Mark

not entirely certain mate, car was imported by a mate whom imports personally.. he hasnt got a yard tho..

and when i got it 2 yrs ago it had 60000 on it then, i saw all the auction paperwork stating grade 4 etc., my interior is spotless. underneath is perfect. it came with everything very standard on it..

but in saying that i dont know how else to tell..

it came in very good condition.. no real wear in all the usual places..

thinking about using nulon.. seems to be decent from what im reading..

Wow, sounds like a winner mate, nice. That condition is a pretty good indicator. The odometer rarely lines up once it has been rewound. Plus, the purchase price may be an indicator as guys selling good cars will not sell them for same as the old clunkers, and it's hard (not impossible) to pass off an old clunker as a good car.

Nulon 10-40W sounds like the ticket. Well, any 10-40 but if Nulon floats your boat, then go for it. I'm no oil expert, yet I never had any dramas relating to oil or ever sat there thinking "...if only I bought the Royal Purple..."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...