Jump to content
SAU Community

Recommended Posts

if im getting the ECU tuned can i run bigger injectors then?

say maybe some GTR injectors or something? whats the easiest and cheapest option when it comes to injector upgrade with tuned ECU? I mean its a not a huge turbo so i wouldnt be expecting more than 320rwhp out of it... so what would enable me to safely run 300rwhp (220rwkw)? or will my stockies be able to SAFELY handle such power?

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

The tuned ECU will only handle the same impedance injectors, which can limit your choice. I believe there are resistor packs you can buy to modify the impedance to work with the stock ECU.

Injectors are expensive, a fuel reg isn't:D

yeah well like i said the reg has already been ordered so i will be running it, i figured if it was easy to upgrade injectors when getting the ECU tuned i could grab some 2nd hand GTR injectors as ive seen them advertised on this forum pretty cheap.

Ill see what i can get out of the pump with regulator first then maybe tune the ECU.

Problem is ive already gone over budget and dont want to spend anymore!!! NOOOOOO but hey its addictive!

bbenny, that turbo is an awesome combo on the rb20, injectors can stretch to 230rwks no probs with a decent fuel pump and pressure reg. Several guys have been running that sort of power out of them for years with no probs.

It may be worth getting a metal afm to turbo pipe, as I have seen them start to choke at about 200rwkw.

Paul, once its fitted, the cost will be forgotten:D (or at least excused:p )

steve: 230rwkw is awesome! are these guys running std computer? i hope i can acheive that sort of power!

Nissky: Procar is in Cromer (northen beaches) the guys there are really nice too, i had never been there until recently on a dyno day. then booked it in last week and was suprised how cheap they were! so i dont mind making changes and getting it back on there.

But they dont burn chips for ECU's so i need to find a good place that does.

Thats what i like to hear :)

ill be very happy if i get anything over 200rwkw but 230 is just awesome! well i pick up my new pump and reg tomorrow so hopefully ill fit it all after work and see what i get on the dyno.

Your doing better than me Benny.

I got my car tuned at Procar and hit 251rwhp at 0.8bar on my rb25t. My AFM is the problem at the moment so the other day I went down to Envy Imports and bought a Z32AFM + plug for $260. Hopefully now I can get it tuned at 1.1bar or so (aiming at 300rwhp).

Out of interest, who put it on the dyno? Paul or Jake?

Mark

Neither paul or jake actually, i cant remember his name, a young guy Gorban or something (it was an unusual name) nice guy and knew what he was on about.

the guys at envy are always really helpful, thats who ive ordered my pump and reg from. are you running std computer?

What about SAS? Silverwater Automotive Services.

Unit 1 Silverwater Road Silverwater NSW 2128

PH: (02) 9748 1300 FAX: (02) 96472805

Contact:Aaron Franklin and David Alexander

Email: [email protected]

Local chiptorque agents!

They are Chiptorque agents so should be able to help.

SAS did a friends car, with good results. They also help out with a lot of the Horsepower heros cars at the Summernats, so obviuosly know their way aroud tuning modded cars.

However knowing what they charged for friends car, and what they quoted me for a re-written RB20 chip they are expensive. I suppose you get what you pay for.:)

bbenny i was eyeing off Chris' 2530 as well, dont be too happy with it, youll make me jealous:D

Guest R33GTS25T

GT2530 Turbo Is Good For 220rwkw to 250rwkw got one myself on a 96 gtst.

Having problem though seems to give off a popping sound in between gear changes the sound is comming from the rear (Travelling Down The Exhaust). Sounds like a misfire but is very faint sometimes it is louder but no where near a bang. Doesnt happen if i change fast and get back onto the throttle before the revs drop.

Also doesnt happen when the foots down or when above 4000rpm roughly

Need Help PLz

Yeah the 2530 doesnt usually make over 250rwkw, but remember it has a pretty fat mid range - so its a wicked setup for the street. extremely quick!

Im picking up the bosch pump and sard reg tonight so hopefully ill stick it in tomorrow and throw it back on the dyno to see what happens.

then get the ECU tunned.

Roy: yeah ive heard pretty much what you are telling me about SAS - they know their stuff but charge twice as much as most. I was quoted around $1300 from them a while ago and decided against that and to buy a new turbo instead to make the power.

But looks like i have no choice now

anyone know reasonable tuning shops in sydney? someone that knows skylines maybe...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...