Jump to content
SAU Community

Recommended Posts

iam thinking of the same set up on my car,so what your saying is that i need a bigger pump,some rx7 injectors......how much are they? and a remapped chip,should i get one from toshi....how good are his ? or should i just get mine remapped on a dyno? ive heard this setup is good for around 230-240rwkw?

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

I would get yours remapped. every car is different. I dont think getting someone elses tuned computer would be good as each car has its own individual characteristics.

as for the parts: new pump around $300 - $400 regulator $200 - $300. as for injectors i havent really looked around but i think 2nd hand im guessing around $400 for the 6... not too sure

im going to try with stock injectors.

remap really depends, ive heard around $750 is about the usuall going rate.

If u are going to go more than 230rwkw you will have to change injectors i think, i would even consider possibly a bigger turbo than a 2530 - to make it a little easier, but remember the 2530 is very responsive anything bigger and your power range will be alot higher in the rev range.

well im not too sure to be honest, i asked for an 044 but the guy getting it reckons thats over kill he rattled the name of it but i cant remember. something like 58... i dunno its about $300 (and thats with some sort of discount) it supports alot more power than i need and fits in-tank easily.

Have you put yours on the dyno yet?

I just put a bosch 910 in my car. After installing the td06-20g turbo the car with the stock ecu and fuel pump was getting very lean towards the top end of the power curve. The new fuel pump really made a big difference, now the car runs much more richer. So instead of forking out for injectors I'm gonna do the ecu with just a fuel regulator and try and keep the car to around 350-370hp. I'd love to crack 400hp, but if I crack that I think I'm gonna have to crack open the engine and put better internals in. The pump was $220inc gst and fitting was around $125inc gst.

yeah they are very cheap.

I just got the sexy sard regulator. probably a bit wanky, but it has anodized blue fittings and machined look. i got it very cheap tho with the skyline adaptor plate. so it fits straight in too.

Im just wondering whether the car cut out due to an airflow cut or because it sensed the pump couldnt cope...

anyone know if skylines do have fuel cuts? because i was running higher boost with the std turbo.

ECUs that are re-mapped on a bench arent exactly the best way to go. It assumes a lot of things concerning your engine.

It can work and im sure it has worked for ppl out there, but as an absolute minimum i suggest you get your car dyno'd to check A/F ratios once you have your bench written ECU installed. Just to be sure its not way off.

The beauty of getting car tuned on dyno is that the good places (read expensive) monitor fuel rail pressure and flow, injector duty, use forms of knock detection etc etc to be sure that the increase in power isnt going to shorten the life of your pride and joy.

i got my Sard Reg from Envy imports. they had them in stock with all adaptor plates and fittings for standard 8mm hose or threaded fittings for braided line.

very helpful and had what i needed in stock. they even ordered the pump i wanted and i received it that very day.

i hate having to wait :P

Yeah they are actually cheaper. they have the Reg with the skyline adaptor (usually $30 or something) with fittings for $330 total

i was pretty stolked with the price as most other retailers were selling for $340 without adaptor or fittings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...