Jump to content
SAU Community

Recommended Posts

iam thinking of the same set up on my car,so what your saying is that i need a bigger pump,some rx7 injectors......how much are they? and a remapped chip,should i get one from toshi....how good are his ? or should i just get mine remapped on a dyno? ive heard this setup is good for around 230-240rwkw?

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

I would get yours remapped. every car is different. I dont think getting someone elses tuned computer would be good as each car has its own individual characteristics.

as for the parts: new pump around $300 - $400 regulator $200 - $300. as for injectors i havent really looked around but i think 2nd hand im guessing around $400 for the 6... not too sure

im going to try with stock injectors.

remap really depends, ive heard around $750 is about the usuall going rate.

If u are going to go more than 230rwkw you will have to change injectors i think, i would even consider possibly a bigger turbo than a 2530 - to make it a little easier, but remember the 2530 is very responsive anything bigger and your power range will be alot higher in the rev range.

well im not too sure to be honest, i asked for an 044 but the guy getting it reckons thats over kill he rattled the name of it but i cant remember. something like 58... i dunno its about $300 (and thats with some sort of discount) it supports alot more power than i need and fits in-tank easily.

Have you put yours on the dyno yet?

I just put a bosch 910 in my car. After installing the td06-20g turbo the car with the stock ecu and fuel pump was getting very lean towards the top end of the power curve. The new fuel pump really made a big difference, now the car runs much more richer. So instead of forking out for injectors I'm gonna do the ecu with just a fuel regulator and try and keep the car to around 350-370hp. I'd love to crack 400hp, but if I crack that I think I'm gonna have to crack open the engine and put better internals in. The pump was $220inc gst and fitting was around $125inc gst.

yeah they are very cheap.

I just got the sexy sard regulator. probably a bit wanky, but it has anodized blue fittings and machined look. i got it very cheap tho with the skyline adaptor plate. so it fits straight in too.

Im just wondering whether the car cut out due to an airflow cut or because it sensed the pump couldnt cope...

anyone know if skylines do have fuel cuts? because i was running higher boost with the std turbo.

ECUs that are re-mapped on a bench arent exactly the best way to go. It assumes a lot of things concerning your engine.

It can work and im sure it has worked for ppl out there, but as an absolute minimum i suggest you get your car dyno'd to check A/F ratios once you have your bench written ECU installed. Just to be sure its not way off.

The beauty of getting car tuned on dyno is that the good places (read expensive) monitor fuel rail pressure and flow, injector duty, use forms of knock detection etc etc to be sure that the increase in power isnt going to shorten the life of your pride and joy.

i got my Sard Reg from Envy imports. they had them in stock with all adaptor plates and fittings for standard 8mm hose or threaded fittings for braided line.

very helpful and had what i needed in stock. they even ordered the pump i wanted and i received it that very day.

i hate having to wait :P

Yeah they are actually cheaper. they have the Reg with the skyline adaptor (usually $30 or something) with fittings for $330 total

i was pretty stolked with the price as most other retailers were selling for $340 without adaptor or fittings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...