Jump to content
SAU Community

Recommended Posts

Hey Everyone!

Well it's finally time to get rid of the rest of my spare parts from my beloved 95 R33 gts-t (who now rests in skyline heaven)... :( The list of parts below are just the main things that I have, however there are many little bits and pieces available that I haven't listed which one may need for whatever purpose.. so just ask!

Inside..

Pretty much all interior panels, covers and vents..

GTR Dash cluster - variable colour --> Green/Indigo-Blue & adjustable light/dim (looks very nice) - comes with adjustable control unit - $400

Door trims - $80

Rear seat trim (passanger side only) - $40

Door rubbers - $20

Piller trips - $40pair

Sunvisors - $20pair

Rearvision mirror - $20

Vents - $15 each

Cluster surround - $70

Climate control - $30

Glovebox - $20

Floor mats (genuine Nissan) - $100

Front seats - $150 pair

Rear seats - $100

If you are looking for something that's not listed here.. chances are I have it, so just ask!

Outside..

GTR rear wing (series 1 r33) - $250

GTS-s rear skirt (standard r33) - $50

GTR side skirts (some minor skuffs - r33) - $180

Bolt on wing.. never used - $100

R33 Doors (small dint - one on each door) - $90 each

r33 Diff - $200

Rear suspension (including springs, arms etc..) - $180

Front rotors & calipers (with brand new pads) - $1100

Bosch 040 intank fuelpump & cradel - $200

rear lights - $120pr

Wipers - $35

Rear halfcut (includes both rear quarters, subframe, tank etc.. - $400

2 x 17" rims (9") - $140

Under the bonnet..

Hiflow GTS-t turbo (T3/T4) with custom 3 1/2" dump- suit r32&33/VL/SR upgrade - drop in replacement for R33 gts-t Turbo (T3/T4) - Has only run 1,000km since Hiflow - When running on the car, was dyno'd at 224rwKw @ 14psi - $850

Brake master cylinder - $100

Crossover pipe - $50

Clutch cylinder - $100

Go Fast Bits BOV - $200

-------------------------------------------------------------------------------------------------------------------------------------

Prices are somewhat negotiable as I really need to sell these parts soon as I'm leaving overseas in 3 weeks. Please just email if you have any questions about these parts, or any others, or would like some photos. Alternatively, you can buzz me on 0422 732 541. All the parts are located about an hour from Melbourne, however can easily be freighted anywhere in Australia very cheaply.

Cheers, Grant

Edited by downunder33
do you have the little driver side seatbelt holder out thingy?

and also interested in the brakes, but wtf $1100? did you mean 110?

Hey man,

yeah I believe I do have that.. I will have a look and get back to you regarding it. Might just take some time to find it! can you be a little more exact about the part? Is it the one the sits at about head height and is where the seat belt runs through to come back down across the body?

Regarding the brakes, that was an old price I had for all four brakes plus some other suspension towers and things.. i had just updated the post and didn't realise. did you want to make an offer on the front brakes? i haven't got a price yet but will check it more. what did you want cause i have the rotors, calipers, pads, everything.. rather sell it as a package.. let me know what you want to do,

cheers, grant

Hey, Got any pics of the gtr rear wing?

Thanks mate

hey Trav! yeah I do have photos except not yet. I'm in the process repainting a part of the bar, so will have those pics soon. whats ur email that i can send them to? cheers, grant

Hey bud, what does the bolt on wing look like? colour and size? thanks mate

Adam

Hey Adam,

The bolt on wing is a dual finned wing. It has two strut towers which hold it. They are aluminium and the wing itself is black and sits about 7 inches from the boot. Did you want some pictures? just pm me and I'll reply with them. The bar is adjustible too. Was looking for 100 + postage. Also have the GTR series 1 rear bar too if you're interested.

Cheers, Grant

Edited by downunder33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...