Jump to content
SAU Community

Recommended Posts

  • Replies 167
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Reckon me and missus should be there, about time I turned up to one of these and met a few new peoples, hopefully by car will be back on the road by then else it'll be the Excel FTW! :laugh:

excels r fooly sik uleh :P

-D

im a part time northerner :laugh: Since im at lukes half of the week.

I must be one of the only ones that lives central to the city?

Anyway, looks like this is going to be a good turnout this time, if everyone thats said they will come actually turns up this time :P

Reckon me and missus should be there, about time I turned up to one of these and met a few new peoples, hopefully by car will be back on the road by then else it'll be the Excel FTW! :(

hey ash what you been up to mate? haven't got the bike anymore, last time we caught up you were hobbling around schutzenfest on crutches

flick should be able to let you know by friday night, its good working in the city now don't have to drive from way down south for the dinners :)

was anything happening afterwards? i hear there's talk of buckhunter, i want a rematch andrew after the pool night

Might be in for this. Its a maybe at this point. If ya make the booking, we will just eat at a diff table and meet n greet afterwards. Havnt seen u and luke for ages and havnt met anyone else so would be good. If a mate says he can come then yeah, can stretch the legs on the GTR. (if its not in getting mods that is :D) so dont add me to the list, but yeh, may make an apperance ;)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...