Jump to content
SAU Community

Recommended Posts

Not sure anyone is saying the 6 speed is weaker, I get that Snowman had problems with his, and went with the 5 speed for both cost and better ratios.

Circuit racing /= Targa though so using Super Taikyu as an example is probably pointless.

Same basic spec cars, about the same power, so i thought it would be a reasonable example that there is nothing weak about the 6 spd, nor did Nissan engineer down the quality of the drivetrain or later models. With no Grp A like in teh R32 days, and JGTCC so removed from road cars, i suspect Super Taikyu had even more importance to Nissan with the R34

the gearboxes in FD RX7 are clearly far far stronger than 32, 33 or 34 GTR... one day you could all become enlightened and pass over to the dark side !!

that is because a rotor lacks the torque to brake traction let alone gears. :)

Is the Targa DVD going to have any extra content in the main doco than the TV Doco? The doco's 10 years ago were much better, I watched a couple leading up to Targa, and they were longer, and showed a bigger varity of cars. But they did come out months after the event, as opposed to weeks.

I asked to Mazda crew when I was sitting between staged if they carried spare apex seals around with them...they didn't see the humor in it. Any gearbox could last behind a rotor :)

I meant the 5 speed is a benefit not so much because it is (marginally) stronger, but when coupled to the matching R32/33 diff gears they're better imo for this type of motorsport.

Anyway, I couldn't give a shit and am ready and waiting to move on :wub:

Roy is talking about anal now, has no one noticed?

Savman, yup, Mt Stuart for the 32. I better get to prepping the poor old girl. Straight after Superlap.

I'd like to apply for a derived time for the hour of my life lost last night and I'll happily take the penalty.

Apparently the Early Modern category (of which the majority of this forum competes in and watches) wasn't good enough for a mention or a final classification on the Doco.

I know not everyone can make it on the doco, but shit to miss a whole category??

as I said before, EM seems to be the black sheep so enough with the bickering... to busy arguing to realise your all getting screwed

was the most entertaining category too... close racing, crashes, mechanical failures and a bit of controversy all thrown in the mix... more interesting than F1 anyday!

Roy that's a disturbingly perfect analogy...

I'd like to apply for a derived time for the hour of my life lost last night and I'll happily take the penalty.

Apparently the Early Modern category (of which the majority of this forum competes in and watches) wasn't good enough for a mention or a final classification on the Doco.

I know not everyone can make it on the doco, but shit to miss a whole category??

I'm not surprised really.

WOW...Quiet in here :D Even after Bris brought up Anal LOL

So I am finally coming down from the high of Targa...

Whats next for peeps....Hi Country seems so far away :)

Is Classic Adelaide really gone under?? Any more news?? I know some where worried that they have lost there earlier bird entry already.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...