Jump to content
SAU Community

Recommended Posts

The way I read the rules it's any E85, as long as the 85% of ethonal is from CSR. "CSR Ethonal blend" is the wording from memory.

I'm hoping that's right, cause the Powermax is cheaper than the CSR (now Sucrogen), and uses CSR ethonal

Did you mean Power Plus?

Right now I can find 4 suppliers of "racing" E85.

Power Plus

Cheetah Race Fuels

Elf Race Fuels

Fuel Control Australia

But you can also buy the non-racing (basically 91RON mix rather than 98RON mix) from a couple of local petrol stations.

I guess it would be tops to know from that list what can and can't be used.

yeah that's the one. From what i know

Power Plus - 85% CSR Ethonal, 15% Power Plus 98 - $2.30l in tassie

Cheetah ?

Elf - ?

Fuel Control Australia - official CSR E85 (now Sucrogen) - $2.50l +postage to tassie

Phuck bolts, too heavy.

Zip ties and black Sika is where its at.

black sika? forget that, just get into some black nikka and you will think chewing gum is all the sealant you need... my nikka.

produit-black-nikka-special-53.jpg

that RX7 is not a bad piece of gear for $35K providing the engine is a good one. it would be a great fun circuit car or a pretty lively tarmac rally car.

also on E85 there is also a local sydney supplier now who is selling E85 with the CSR ethanol but blended with BP100 RON premium petrol instead of 98 pump gas. if anyone is keen send me a pm and I'll put you in touch. price is competitive I think and can deliver drums of various sizes.

that RX7 is not a bad piece of gear for $35K providing the engine is a good one. it would be a great fun circuit car or a pretty lively tarmac rally car.

Ric know's how to build them, and with his mullet powers he can race them too

yeah those more cost effective E85s work under the regs.

for THC mark and the team at race fuels will be doing e85 fuel service http://www.racefuels.com.au/, and there is a 98ron servo on the coursewe cross over twice daily (well prettty close on sunday anyway).

touché... both the red and silver ones!

word on the street is they're right up there with white gts-t's :)

actully it's better than mine, i just got 0km/40l when i emptied my tank. The fuel was so stale it wouldn't run a lawnmower

yeah those more cost effective E85s work under the regs.

for THC mark and the team at race fuels will be doing e85 fuel service http://www.racefuels.com.au/, and there is a 98ron servo on the coursewe cross over twice daily (well prettty close on sunday anyway).

Good to know - thanks Stu.

Spoke to Mark this morning and the Elf E85 is selling here for $2.20/L - best rate so far I've found for 98RON blended E85 - and will also be available as an on course back up for THC anyways. Hopefully it goes well and we see them back as another supplier in Tas 2011 as well.

Good to know - thanks Stu.

Spoke to Mark this morning and the Elf E85 is selling here for $2.20/L - best rate so far I've found for 98RON blended E85 - and will also be available as an on course back up for THC anyways. Hopefully it goes well and we see them back as another supplier in Tas 2011 as well.

Devonport Tyres are the Elf boys... spose mark is using this to get rid of all the elf98 that they have laying round? Scott or Dean @ DPT&F (03) 6427 0700

So I took Newtons EMO 4 for a spin up at DECA on the weekend.

Easiest car to drive fast I've ever driven - by a long way. Quite scary really.

I've driven lots of EMO's over the years but that was the first one thats made me think twice. The challenge now will be to make my new toy as close to being that good as possible. But it was a real eye opener into how good a pretty basic, low powered car can be. But it was a good lesson in that an easy car to drive fast is better than a fast car. It's just easier to build a fast car than it is the other way around!

I heard on the grape vine today that a Western Australian father of a former Joker is planning on building a number of homologated super EMO's with stroked engines, carbon fibre everything and sequential gearboxes to run at Targa 2011 with his #1 driver moving from the R35 to the new car.

Apparently you can have one for a cool $250K (or less if you provide your own "donar" car).

I really need to get onto this Racepace GT-R concept before this window gets closed!

I concur. I think factory specials are ok but workshop specials are going a bit far.

But where then do you draw the line with things like the Skelta's / Daytona's etc.

It's all too hard - but the big boys with the cash are sure going to exploit it whilst they can I guess. Perhaps TQ will see if there is some way to homolagate his RSR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...