Jump to content
SAU Community

Recommended Posts

.........One of the things I'll be giving some feedback on is the scruitineering of cars (well checking of tyres) during the day. Three service crews(including ours) saw an EM competitor pull up for service after Hellyer and take THREE TYRES during their stop. The incident was reported, but apparently nothing could be done as there was no photographic evidence and the car turned up to service that evening with correctly marked tyres back on the car. I'm sure the bad weather & incidents that afternoon meant the stage officials were focused on other things, but it's still disapointing that a car which would have been running with unmarked tyres was not picked up, and went on to finish well inside the top ten.

....

When I blasted thru the Waratah TO service area it was absolutley pissing down... I couldnt see the dash let alone what was going on elswhere. I heard the accusations and also the story of what happened from one of the accused crew – I have to say the story was quite plausible. One question – was there three wheels on the road ready to be fitted, or was the guys moving them in and out of a serviuce vehicle? They had a puncture on day 2 so I am tipping there might have been some indecision as unlike most they did not have two fresh ones to go on… I have no Mazda axe to grind, but hearsay and innuendo with out proof is no more interesting than the royal wedding.

TT

So Kate Middleton was a stripper and you gave her a months worth of wages in tips?? :)

It will be interesting to see the Targa footage this year. They lost so many front runners along the way the whole week in both outright and classics that the story could be a bit dis-jointed on TV.

I still don't think EM will get much (if any) coverage even though there were a couple of cars running in the top 10 outright for a bit there. So I think if you really want coverage in an older car you need to go the Matt Close option and put your hand up to run in outright even if you are in an EM car. I haven't decided what I am going to do in the future but I think if I do run Targa again it will be in outright - not sure whether that will be in the current car or else in a new one. Some of the guys like Matt Close, Dean Evans and Dean Herridge showed you don't need a $1M Lambo to do ok in outright - and hell Brenno's effort was simply awesome.

But I think in the short term a trip to Europe with Brisby to go Ice racing in Finland and driving an F1 car in Southern France might take priority over tarmac rallying. Targa is great fun - but there are so many other things out there to do with cars as well.

When I blasted thru the Waratah TO service area it was absolutley pissing down... I couldnt see the dash let alone what was going on elswhere. I heard the accusations and also the story of what happened from one of the accused crew I have to say the story was quite plausible. One question was there three wheels on the road ready to be fitted, or was the guys moving them in and out of a serviuce vehicle? They had a puncture on day 2 so I am tipping there might have been some indecision as unlike most they did not have two fresh ones to go on… I have no Mazda axe to grind, but hearsay and innuendo with out proof is no more interesting than the royal wedding.

TT

I can't hand on heart say what happened because I wasn't there and I am also not one to support hearsay and innuendo.

All I can say is that I heard directly and independently from each of the service crews who saw this happen, and that three tyres were taken out and three were put onto the car. There was definitely no rotation of tyres (I asked this question of the people telling me what happened a number of times to be sure).

One guy thought it looked a bit suss from the outset when he saw three tyres come out, and tried to video what was going on from from his phone. From what I understand the file didn't come out clearly/completely enough to be acted on.

I know all of the people who witnessed this happening quite well and have no reason to doubt what they say they saw. One of the crews supports a car running in a different category so they had no real motive for telling me what they saw, other than they thought it was wrong that someone should be doing this (and doing it so blatantly).

I can't believe I'm actually typing this...... but guys, gimme some feedback.

Should I buy an Evo 6 or an 8? Early modern is where it's at, 8's are elligible next year I believe.....

I love the lack of weight in the 6 (and the look), but feel that maybe the 8 is actually a better "thing", a bit newer, a bit tougher.......

**flame suit is on**

I've had a long hard think about it, and whilst the Audi could be done, I feel, for me at least, it's better to campaign something that I can afford to walk away from without shedding too many tears. That's the advice I give people, so I should probably heed it :) lol

Plus, I'm keeping my Skyline to use up here, and plan to keep the Evo in Tassie so I can save a bit (heaps actually) on freight. The Audi, well it would need to be my "daily driver" and hence cannot stay in Tassie lol

When I blasted thru the Waratah TO service area it was absolutley pissing down... I couldnt see the dash let alone what was going on elswhere. I heard the accusations and also the story of what happened from one of the accused crew – I have to say the story was quite plausible. One question – was there three wheels on the road ready to be fitted, or was the guys moving them in and out of a serviuce vehicle? They had a puncture on day 2 so I am tipping there might have been some indecision as unlike most they did not have two fresh ones to go on… I have no Mazda axe to grind, but hearsay and innuendo with out proof is no more interesting than the royal wedding.

TT

Hearing you Greg,

it seems if they were being so blatant about it either they are very silly or arrogant, or what they were doing was legit so they had nothing to hide.

I heard similar stories as I am sure many have about the legitimacy of Quinns engine in his 35. Stories like "its a 100k cosworth 4 litre" etc etc. I called a couple of people on it and asked how they knew.....silence.....So I suggested maybe they get some facts first. He certainly doesnt seem to be down on power, but I dont think making good power has ever been a problem for GTR's. :) And the reality is whatever car it is, it doesnt steer itself and still needs to be piloted to get the result. Shame to see this sort of stuff being peddled and tarnishing his efforts without any strong basis. (well i am not aware of any...happy to be enlightened) I am guessing these things start by one person saying "I reckon he's running a stroker" and the next time the conversation is had the "I reckon" has been dropped and all of a sudden its fact. I doubt anybody actually has the first hand evidence to prove the claim but some mud will always stick.... Seems to be plenty of "talk" around targa.....probably one of my least favourite parts of the event.

Be keen to hear from anyone as to what capacity my evo finished up with by the end of the event. ;)

For me I dont think Targa will ever go better for us so I am quitting while I am ahead. :) The reality is the money tree has absolutely no foliage left on it. Despite the fact that the car wouldnt take much to front up again, its still a massive undertaking. Hopefully get back there one day, but it will be a while away. For now I will put a ridiculous wing and a front splitter on my car and do some track stuff here in WA. Awesome to have got over there once though and lived the dream. Such a unique event.

Haha, Blaise, I heard yours had the prototype of a new 3.4 litre engine :D

But it makes me laugh, people who go on about strokers.... as if power is the be all and end all of doing well in the event. It's simply not! Most of us here know what it takes, a combo of good notes, good commitment, good preperation, and yes, a good car too. Fact: I know of a few cars that absolutely have illegal cheater gear on them, strokers included, but the guys can't drive for shit, and never seem to do any good. Weird that huh! LOL

Timmy and I heard whispers surrounding our car in 2009 of a stroker/RB25/cheater/whatever. No one ever came out and asked us though. I would have gladly taken them over the car to show them how little it actually did have, I may not have been quite as proud of all the China brand stuff on it though :P

And Blaise, as I said to you at Tugga, if you decide to sell, let me know ok :)

I can't believe I'm actually typing this...... but guys, gimme some feedback.

Should I buy an Evo 6 or an 8? Early modern is where it's at, 8's are elligible next year I believe.....

I love the lack of weight in the 6 (and the look), but feel that maybe the 8 is actually a better "thing", a bit newer, a bit tougher.......

**flame suit is on**

Hey Woo,

so they are shifting the EM date???? Although doesnt seem to matter as it seems if you know the right people you can run an VIII/IX chassis in EM. ;)

My view is I reckon the 8 is the way forward, or if not eligible the VII. The RS is the go. (8MR RS??) The ACD (active centre diff) is a good thing and does add some genuine performance benefits. (and a little weight) The chassis also seems a little more stable so be better for the silly high speed stuff. I had an 8MR road/track car once upon a time and they have all of the electronic acronyms fitted. (AYC, ACD etc etc ect) and I found it a little dull to drive. Too digital.... I'm more for analogue. :) Was still very quick, and also vry forgiving. You could get stuff a little wrong, keep it buried and let the elctronic talent come to the rescue. There is certainly something to be said for a car that is a little more forgiving and allows greater consistency. Retaining the ACD but with mech diffs elsewhere would be tops.

You will no doubt make a VI lighter, but I am not sure it will be hugely lighter if you really work hard on a VII-VIII. Heaps more parts around for the VII-IX too.

All that said, nothing wrong with a VI/TME, but I think the CP9a chassis woudl be the go.

Edited by Darkside

^^^^^ Yep... I am guessing team Perini is in one??

Similar to yourself woo, I really liek the look and slightly old skool nature of the TME. And it just happened to come up at auction at the right price.

But had I read the rules more closely and realised a VII was eligible, that probabaly would have been the car to build. And realistically, they are near enough to a IX (sans mivec) in VII clothing.

Edited by Darkside

Something I hear which is of great importance for me given my track record (or Timmy's bad calls? :P haha), panels and bars etc are cheaper for the later ones?

Any truth in that?

Edited by Marlin

Something I hear which is of great importance for me given my track record (or Timmy's bad calls? :P haha), panels and bars etc are cheaper for the later ones?

Any truth in that?

Absolutely. Given the amount of guys still punting VI's in the gravel as well as tarmac, consumables like front bar skins and guards etc can be a little harder to come by from wreckers. That said you can still buy new from mitsi...just a little pricey. Parts common to the lancer (doors) are easier to find and cheaper. Its mainly the ali bonnets and front guards that can be hard to find. Although if you dont mind investing in spares, there always seems to be the odd front cut coming in from time to time so you can snap em up and put them aside.

If you cant get factory, you can always get FRP or carbon bits from your ususal aftermarket people for the VII +. Much harder to get these types of things fot the VI.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...