Jump to content
SAU Community

Recommended Posts

If anyone can help would be appreciated

Doesnt always do it but will idle high when decelerating and when take out of gear sits on around 1200-1500 revs and wont go down unless i hit accelerator.

Friend mentioned AAC but cant find thread on here on how to do it, could it be caused by anything else?

I have aftermarket radiator bought from here, MSpec bit larger

Splitfire coilpacks

NGK platinum sparkplugs

Oil cooler

POD

Was happening even before i installed any of these on my car

Injectors need to be changed as ticking noise coming from them

Thanks for any help

Link to comment
https://www.sau.com.au/forums/topic/228103-idling-high-mostly-on-decelaration/
Share on other sites

  • 1 year later...

OK well idle thing has been happening still, now on deceleration i can hear it spluttering , and can see the revs not dropping fast enough like it does when its running ok.

Have done an oil flush, could it be anything to do with the exhaust, maybe a new muffler needed?

Cleaned AAC valve and didn't make much difference at all.

Cleaned AFM, was very dirty but didn't change anything.

Anyone had this problem and can help?

When i tap the accelerator to lower the revs they don't always drop....

No definately not auto :thumbsup:

How much is a new O2 sensor??

Incase it is that, I want it fixed asap as is driving me nuts

Don't know about being a stuck throttle body as hitting the accelerator doesn't do much to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...