Jump to content
SAU Community

Recommended Posts

here are the rough numbers from FAST...

ECR33 - 001000 1993 August (First R33 Built)

ECR33 - 063435 1995 December (S1.5 around here somewhere - ballpark near ECR33 mid 055000)

- model change-

ECR33 - 102000 1996 January

ECR33 - 135381 1998 April (Last R33 built)

so from this we can see ballpark there are around 65,000 Series 1's and approx 35,000 series 2's

SO I HAVE A SERIES 1.5???

whats the big issue?

i swear a few people have said yes its a series 1.5 - its a series 1.5

to be a legit series 2 i would expect

- series 2 interior

- series 2 dash cluster (bevelled warning lights, s1 has flat dash lights)

- series 2 dash (bubbled and textured, s1 has flat matt black)

- series 2 wing

- series 2 engine and front bar, lights, bonnett

- 1996 VIN or build date, anything pre 1996 is almost always 1.5 or 1

- series 2 boot SKYLINE panel is same colour as car (s1 has clear panel)

to be a legit series 2 i would expect

- series 2 interior

- series 2 dash cluster (bevelled warning lights, s1 has flat dash lights)

- series 2 dash (bubbled and textured, s1 has flat matt black)

- series 2 wing

- series 2 engine and front bar, lights, bonnett

- 1996 VIN or build date, anything pre 1996 is almost always 1.5 or 1

- series 2 boot SKYLINE panel is same colour as car (s1 has clear panel)

- a silver rear trunk lock badge

- dual airbags

- no coin holder near the mirror controls

Added 3 more changes to paulr33's list.

The most obvious change is that series 2 has dual airbags. Series 1.5 only driver side airbag and series 1 no airbag whatsoever. No matter how you see it, the airbag is the one thing no one can change hence it you only have what you have then you know what series skyline you have.

You can have a series 1 with series 2 bumper, fog lights, engine and whatever, if you ain't got dual airbags then you ain't got a series 2. Same goes for the other two series. Basically i like the series 1.5 cause it doesn't have the damn heavy passenger airbag and the external ABS module at the center console. Damn module makes the pocket smaller.

I have a series 2 skyline and i changed the boot skyline to a clear one and my trunk lock is not the series 2 one as well so i have a series 2 front end and a series 1 rear end. Even the agent here says why the f**k do i have such a weird skyline. lol

Edited by teng

dont know - we could guesstimate at best guess

the only rare r33 models i can think of are

- series 2 & 4 doors

- series 2 with active lsd

- series 2 with 40th anniversary

- series 1 & 2 GTS4

Yes, tons and tons and tons of right handed R33's Patty.

Lol, I think you are talking about the R33 Left Hand drives... and no, they were not made for the USA, they were put in the left hand drive cities in some other parts of the world. They never have released and never will release a "Skyline" in the USA. The closest we get is the G35, the V35 in Skyline Countries, the G37, the V35 370GT in other countries, and the new "GTR" which is technically a Skyline BUT no "Skyline" badges.

So no, the USA never got any and seemingly never will get any. But I have one in the USA so all is well.

It is a late series 1 and someone's fitted a series 2 bumper for what ever reason, crash, aesthetics etc.

Both series 1 & 2 have a coil pack for each spark plug, it's just that the early series 1 have an external igniter, where as late S1&2 have the igniter built into the ecu.

the igniter is actually built into the coil pack not the ecu.

A series 1 or even a remapped RB20 ecu will run a Series 2 motor no worries.

Off Topic but can someone put this in to nissan fast and show me the info.

VIN: ECR32 - 011618 M06126

Im looking at you Pual :(

Cheers

if you read the thread i posted a link to the fast thread a bit earlier.

Edited by W0rp3D
the igniter is actually built into the coil pack not the ecu.

A series 1 or even a remapped RB20 ecu will run a Series 2 motor no worries.

Right, and I have already pretty much rounded the car down to BEING a 1.5 as well has everyone else. It is series 1.5 which is grand! The coil pack has igniters, no external amplifier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...