Jump to content
SAU Community

R33 Gtr Catch Can

abu

By abu,
in Engines & Forced Induction

 Share

Recommended Posts

abu Grand Master

abu

Posted
Posted

catchcan.jpg

Hey

My R33 GTR came with a custom catch can/water tank that looks identical to the one pictured above, does anyone know what brand catch can/water tank it is? Looks to be a nice neat design but there's no where to open the can up to drain the oil or clean the inside nor any markings to identify

Anyways, its not currently connected and I was just wondering what the best way to plumb it up is, where does the 2nd yellow hose connect to under the intake manifold?

Car isn't anything crazy, just run 14psi, with exhaust, PFC etc etc

Thanks

Link to comment
https://www.sau.com.au/forums/topic/230249-r33-gtr-catch-can/
Share on other sites
(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
You could find, that hose isn't connected to anything, but just vents behind the gear box.

Yeah mine was like that, which is bad, so I took it all out.

But in that pic, it is connected to something, I just gotta find a better pic at home.

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted (edited)
looks similar to arc style

+1

I'm pretty sure ARC doesn't make these anymore but I could be wrong.

Also I'm hunting for one of these.

Cheers

Grant

Edited by Count Grantleyish
DCIEVE Mentor

DCIEVE

Posted
Posted (edited)

really depends if you want to keep it legal..

I have mine set-up such that both cam breathers run to a large baffled tank with the baffle there to force the blowby into the tank rather than going straight to the oulet (this depends on the shape of the tank). I then pipe the blowby from the can to the rear of the car. The legal version of this set-up would see the breather from the catch can running to the inlet pipe on the turbo/s. There are plenty of other ways of dealing with pcv but for a streetcar this seems to be the easiest.

edit; I definantly would recommend a catch can, take a look at the inside of a stock gtr intercooler to see why!

Edited by DCIEVE
Beer Baron Grand Master

Beer Baron

Posted
Posted

there are plenty of companies that make combination washer bottle/catch cans for R33 and 34 GTR. no way to tell where yours is from without pics. to empty it you simlpy unhook the pipes, un bolt it, lift it out and tip it upside down.

Angus Smart Grand Master

Angus Smart

Posted
Posted (edited)

when i get close to back on the road,

i have a massive sheet of alloy at my friends workshop.

we're making airbox and an oil catch/radiator overflow/washer bottle all in one to go in the location where the 32 Gtr battery usually is.

Edited by Angus Smart
abu Grand Master

abu

Posted
  • Author
Posted

Thanks for all the help guys, much appreciated

My car is going for a tune on Friday so I might see if the mechanic can hook it up for me while I'm there if not then I will just do it over the weekend

Appreciate the offer Gareth, I should be a member by the next official event and will more than likely turn up. If its not connected by then your help would be much appreciated

Thanks

some_cs_student Veteran

some_cs_student

Posted
Posted
My car is going for a tune on Friday so I might see if the mechanic can hook it up for me while I'm there if not then I will just do it over the weekend

Appreciate the offer Gareth, I should be a member by the next official event and will more than likely turn up. If its not connected by then your help would be much appreciated

Sure, if you get stuck PM me, once I get the oil change done I usually take the car out most weekends.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...