Jump to content
SAU Community

Ran my car for the first time last night :)

Cool Hand Luke
 Share

Recommended Posts

Cool Hand Luke Community Regular

Cool Hand Luke

Posted
Posted

Not a bad night last night, once i got my starts sorted though the clutch didnt agree and the pedal stuck itself to the floor... just what you expect from a brand new button clutch from direct clutch. Anyway, i managed a best of 13.4@105mph with a 2.2 60ft. The last run my 60ft time was 2.0 but i couldnt shift into 2nd because of the clutch, so with a theoretical best of 13.2 im pretty happy :D. With my over rich std ecu tuned im sure i could pull off a 12 :)

Also if anyone wants to buy it, let me know, selling it because i cant get comprehensive insurance, which is a must for your daily driver..

Cool Hand Luke Community Regular

Cool Hand Luke

Posted
  • Author
Posted
Cant get comprehensive insurance full stop, or cant get it at the right price?

Cant get it at the right price. I like the car, but its not worth $50/week on top of car payments just for the insurance. I called everywhere and the best i can get is $2100. Could get alot better but just car doesnt honor driving company cars to change your rating so with them i have a rating 5. Unfortunate, because i was looking foward to my motec/TD06 ugprade :P Famous were the cheapest at $2195 or so, with a few others around the same price. Just car quoted $2200 with rating 5 or $1200 with rating 1, which i would pay but cant get :D

I think im going to go back and try for a 12. The tyres on the car arnt that happy, down the the worn out marker. I reduced the rear tyres to 25psi, not sure if lower would help as they are 235/40/18's.

What are the opinions on the clutch? The last run i slipped it a bit to control the wheelspin, and it just held there and slipped even after i took my foot right off, and wouldnt release till i missed 2nd gear about 5 times :D Its a 5 puck brass button that direct clutch said it would be good for well over 500hp, i dont think that my car would be anywhere near that much, and are quite dissapointed

b2barker Enthusiast

b2barker

Posted
Posted
Originally posted by gtrhybrid

try to find a friend with tires on rims that are smaller that 18's.  Those cause more drag that you think and the low profile tires leave no give in the sidewalls, and that kills traction.

And the bigger diameter wheels have their weight distributed further from the centre so you loose torque.

(torque=force x distance )

Drag cars have small wheels for a reason.

Roy Grand Master

Roy

Posted
Posted

A TD06 sure wakes up an RB20:D

I would never have believed the old girl could pull 8300rpm so quick and easy (I still havent discovered where the new rev limit is:( )

With just 8psi it spins all thru 2nd and blows the door off the std turbo with 15psi and a tank full of toluene.

Have you tried the usual i have an alarm, drivers education courses etc etc. Tried being a named driver on a parents policy

(not ideal, hey im paying $2600 a year because i have listed all my mods... well except for the new turbo but ill get to that in the next week or two)

Steve Grand Master

Steve

Posted
Posted

Nice result, congrats:)

On insurance, if you can be careful enough, have you thought about just 3rd party fire and theft? It just means you need to be extra careful driving cos if its your fault your on your own - but, you will get to enjoy the car a while longer and every year that you have the insurance your rating will go up, so in a few years the comprehensive will be cheaper. Just a thought, cos this is how I got myself a rating one many years ago.

Cool Hand Luke Community Regular

Cool Hand Luke

Posted
  • Author
Posted

I cant find a company that will do fire and theft for more than $8000 value on the car, any ideas? I dont mind fulll coverage theft but not if it only covers 1/2 or even a 1/4 of the value of the car. Something i forgot to ask about when i was calling around.

Cool Hand Luke Community Regular

Cool Hand Luke

Posted
  • Author
Posted

I just applied for a loan for a BA turbo ute... 511hp at wheels with standard turbo and internals is just too inviting, even if it does weight 1700kg. if that falls back i might buy a mazda 323 and drive that as my daily driver or find somewhere that will insure fire and theft to the real value of my car, and save up for a TD06 and ecu :).

TTT Grand Master

TTT

Posted
Posted

just a question back on the topic...

are you sure it's a clutch problem?

the clutch pedal sticking to the floor sounds like a clutch cylinder problem.

Like there it is sucking in air...

it's a lot cheaper than a new clutch dude.

get a mechanic to check it out..

A new clutch master cylinder and a slave cylinder seal kit for my R32 GTST cost less than $200 supplied and fitted...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...