Jump to content
SAU Community

Recommended Posts

Not a bad night last night, once i got my starts sorted though the clutch didnt agree and the pedal stuck itself to the floor... just what you expect from a brand new button clutch from direct clutch. Anyway, i managed a best of 13.4@105mph with a 2.2 60ft. The last run my 60ft time was 2.0 but i couldnt shift into 2nd because of the clutch, so with a theoretical best of 13.2 im pretty happy :D. With my over rich std ecu tuned im sure i could pull off a 12 :)

Also if anyone wants to buy it, let me know, selling it because i cant get comprehensive insurance, which is a must for your daily driver..

Cant get comprehensive insurance full stop, or cant get it at the right price?

Cant get it at the right price. I like the car, but its not worth $50/week on top of car payments just for the insurance. I called everywhere and the best i can get is $2100. Could get alot better but just car doesnt honor driving company cars to change your rating so with them i have a rating 5. Unfortunate, because i was looking foward to my motec/TD06 ugprade :P Famous were the cheapest at $2195 or so, with a few others around the same price. Just car quoted $2200 with rating 5 or $1200 with rating 1, which i would pay but cant get :D

I think im going to go back and try for a 12. The tyres on the car arnt that happy, down the the worn out marker. I reduced the rear tyres to 25psi, not sure if lower would help as they are 235/40/18's.

What are the opinions on the clutch? The last run i slipped it a bit to control the wheelspin, and it just held there and slipped even after i took my foot right off, and wouldnt release till i missed 2nd gear about 5 times :D Its a 5 puck brass button that direct clutch said it would be good for well over 500hp, i dont think that my car would be anywhere near that much, and are quite dissapointed

Originally posted by gtrhybrid

try to find a friend with tires on rims that are smaller that 18's.  Those cause more drag that you think and the low profile tires leave no give in the sidewalls, and that kills traction.

And the bigger diameter wheels have their weight distributed further from the centre so you loose torque.

(torque=force x distance )

Drag cars have small wheels for a reason.

A TD06 sure wakes up an RB20:D

I would never have believed the old girl could pull 8300rpm so quick and easy (I still havent discovered where the new rev limit is:( )

With just 8psi it spins all thru 2nd and blows the door off the std turbo with 15psi and a tank full of toluene.

Have you tried the usual i have an alarm, drivers education courses etc etc. Tried being a named driver on a parents policy

(not ideal, hey im paying $2600 a year because i have listed all my mods... well except for the new turbo but ill get to that in the next week or two)

Nice result, congrats:)

On insurance, if you can be careful enough, have you thought about just 3rd party fire and theft? It just means you need to be extra careful driving cos if its your fault your on your own - but, you will get to enjoy the car a while longer and every year that you have the insurance your rating will go up, so in a few years the comprehensive will be cheaper. Just a thought, cos this is how I got myself a rating one many years ago.

I cant find a company that will do fire and theft for more than $8000 value on the car, any ideas? I dont mind fulll coverage theft but not if it only covers 1/2 or even a 1/4 of the value of the car. Something i forgot to ask about when i was calling around.

I just applied for a loan for a BA turbo ute... 511hp at wheels with standard turbo and internals is just too inviting, even if it does weight 1700kg. if that falls back i might buy a mazda 323 and drive that as my daily driver or find somewhere that will insure fire and theft to the real value of my car, and save up for a TD06 and ecu :).

just a question back on the topic...

are you sure it's a clutch problem?

the clutch pedal sticking to the floor sounds like a clutch cylinder problem.

Like there it is sucking in air...

it's a lot cheaper than a new clutch dude.

get a mechanic to check it out..

A new clutch master cylinder and a slave cylinder seal kit for my R32 GTST cost less than $200 supplied and fitted...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...