Jump to content
SAU Community

Installing Bigger Fuel Injectors

Musky

By Musky,
in Engines & Forced Induction

 Share

Recommended Posts

Musky Experienced

Musky

Posted
Posted

Hey guys,

I've got half a day off work and nothing to do and was going to fit my sard injectors into my rb25 therefore saving me some dollars in labour. The question i ask is: If i do this will the car run (i realise it wont be running too well) so i can take it to a tuner and get it tuned? I have a powerfc fitted, is there an option i can use to temporarily get the car moving?

Any fast response WILL be greatly appreciated :sick:

:O

Link to comment
https://www.sau.com.au/forums/topic/231787-installing-bigger-fuel-injectors/
Share on other sites
r33cruiser Grand Master

r33cruiser

Posted
Posted (edited)

wat size man.

i could run 550cc. they are able to putt short distances...

use the stock ecu to get there. then when in the tuners carpark, switch it over to PFC

Edited by r33cruiser
BHDave Grand Master

BHDave

Posted
Posted

Are the sards the old single pintle type?

If so chuck in injector correction of 70% (so you have a bit of extra fuel just in case) and a latency of 12ms.

done, drive it off boost to the tuner, the o2 sensor will do the rest.

Musky Experienced

Musky

Posted
  • Author
Posted
Are the sards the old single pintle type?

Im not too sure? They aare a couple of years old and have pintle caps?

Cheers for the info mate, will be doing it next time i've got some spare time.....

Musky Experienced

Musky

Posted
  • Author
Posted

Yew...another day off, sucks cuz im not getting money, good cuz i can work on my car :P

So im gunna have a crack at fitting the injectors but I've also got a z32 afm lying around, same question, can that be fitted without causing troubles?

Im just really trying to save myself some bucks here, i liek to get to know my car better too and im a bit handy with a tool in my hand (take that how you will :worship: ).....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...