Jump to content
SAU Community

Recommended Posts

I've booked my car into RPW. Can anyone vouch for them being a decent automotive tuning centre?

Would like to hear some genuine comments. Anyone one know some one who's had webers done there?

Thanks Rick

hey rick

i had ma mitsi lancer done there b4 when i use to drive one

nver had a problem with them :)

but all i had done was extractorsm, pod and fuel pressure regulator n cold air induction

seems to be a good group of guys there tho

I've booked my car into RPW. Can anyone vouch for them being a decent automotive tuning centre?

Would like to hear some genuine comments. Anyone one know some one who's had webers done there?

Thanks Rick

I had a manual te magna before the skyline and used these guys, they knew there stuff but i had a feeling i was paying way to much as i knew bugger all back then. They charged me over $2000 for a stock clutch replacement plus clutch hydrolics. Looking back i was definetly ripped off.

What car do you have, if its a mitsubishi then they are very knowledgable on mods and stuff.

However they (Dave) will rip you off if he gets a chance.

They are very good just be vary is all, i was a member of the aussiemagna club and i heard of other members been sold second hand stuff and paying and being told the goods were new regulary.

I hope my comments are in the rules i am assuming they are ok as RPW have nothing to do with skylineaustralia. Apologies otherwise

hmmm ..just be careful.

check out www.ozvr4.com

They are regulars on there and can talk up some bull ca ca

Thanks for your input, I have a 1978 Datsun Skyline that has a crate NISMO motor , L28 bored to 3.0L with triple 45mm webers and a 1/2 rally cam. Japanese intake manifold and jap extractors which may also be NISMO items. I'm just looking to get my triple webers tuned ,so there won't be many parts supplied, only labour and dyno time. Thanks Rick.

Thanks for your input, I have a 1978 Datsun Skyline that has a crate NISMO motor , L28 bored to 3.0L with triple 45mm webers and a 1/2 rally cam. Japanese intake manifold and jap extractors which may also be NISMO items. I'm just looking to get my triple webers tuned ,so there won't be many parts supplied, only labour and dyno time. Thanks Rick.

Take it some where else, dont let them touch anything other then mitsi / hyundai / crysler

There are heaps more knowledgable, realiable cheaper workshops for nissans then them. Try the consolidated workshop thread heaps to choose from. I highly recommend hyperdrive out of all those

its crazy we can say what we wont about this work shop that doesn't seem to have any sponsorship or input to these forums..

Just removed my comment so i dont cause any problems

Edited by Pattygtst
i agree dont go any where near them with your sort of car, plenty more knowledgeable workshops out there

just out of curiosity and in no way am I batting for this workshop, but what experience have you had with RPW sam?

Thanks everyone for your remarks, sorry to hear people have had bad experiences. I've been there done that too. Had a guy in Kalgoorlie(when I lived there) charge me over $500 for weber tune and they were still CRAP, was I pissed. Anyway luck has it I've tracked down a guy called Daryll who once owned Automotive Tuning Centre in Welshpool. He used to service this car when it did sprints at Wanneroo and once a year I'd bring it to Perth for him to service it. He's retired but has kept all is equipment and is going to look at them next week. Yahoo, at least i know what I can expect. Nothing worse than going to pick up your car, they hand you the bill not looking for your facial expressions, inside your saying "what the f..."and you drive away feeling RIPPED OFF no wonder ya get busted for hoon driving 2 minutes later. Sorry officer, I was just venting my blow off valve before i exploded. Enough said I think.

Lookout for my old skool dato once Woopass Wed starts up again as i intend to take it quite regularly.

Just got to apply some decent paint.Chow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...