Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

So, I've been out of bikes for a long time (10ish years, since school... oh god I'm getting old :P) and the other day I went out and bought myself one of these -

cannondale-f6-disc-2008-mountain-bike.jpg

Cannondale F6 hardtail.

Same colour as the one in the picture, except mine's got V-brakes instead of cable discs. Could have had it in red but my car's red so I wanted something different :)

Picked it up for $750, but have had the bike shop retrofit a lockout on the front suspension and changed the tyres to something slightly better for the road. The idea is to use the bike for riding to work and also for some light trail work out in the forest, hance why I got a mountain bike instead of a road bike.

I don't really know that I've gotten a good bike for what I paid so any feedback by those more knowledgeable would be good :)

I test rode this one and a $1,000 Avanti and chose the Cannondale because it felt lighter and came with a 15-year frame warranty as opposed to a 5-year warranty with the Avanti. They felt pretty much the same to ride. The Avanti had a bit better brakes but that's about all I could distinguish.

to be honest, frame warranties aren't worth looking at. as long as it is at least 12 months you will be fine. they are only for manufacturer defects which should either be picked up before it leaves the shop or within the first few rides. also cannondale are pretty shocking when it comes to warranty claims. because they have such a reputable name, they don't give a shit about warranty because they know that no matter how shit their service is people will still buy their bikes.

the same goes for their pricing. sure they are good bikes, but they charge you top dollar. $750 isn't a bad price though. that is partly because (i'm 99% sure) the F6 is an 08 model not an 09 (don't think they did it this year) so it hasn't been subject to price rises like the 09 stuff. so compared to 09 stock it is well priced, but compared to other 08 stock (when both at RRP) it lacks behind a bit in the quality of components

yea price for that is fine in this day n age - besides truth be told for what a bike does - which is... commute and get you fit and burn fat... in my eyes there really is no "expensive" and "cheap"

you get what you pay for, you want cable discs? pay for them, hyrdo discs? pay for them too, remote lockout? pay for it

etc etc

cars

now THEY are a waste of money.

Because it will break sooner, because they used cheaper parts, therefore keeping marc in business.

OR

It will be just as good, because you aren't paying for Lance Armstrongs prosthetic testicle via sponsorship money.

if they are the same spec (meaning same model gears, etc) then the extra money is simply going into someones pocket other than your own.

that is why when someone says that a certain brand bikes are shit, it is pretty stupid, especially in the higher end stuff where they will all be pretty much running the same gear (including frames).

hey guys,

im just wondering if any of you know the maximum tyre width that can be used on a

2006 Apollo Altitude XC ??

Because im looking at getting these 2.5inch wide Maxxis Hookworm street tyres

but i want to know if they will fit http://www.maxxis.com/Bicycle/Urban/Hookworm.aspx

i have 1.95's on it now and about 5cm on either side of the tyre before it reaches the frame.

cheers

you MAY fit 2.5's on, but there is a very good chance they will rub the frame, and if you ever get the slightest buckle they will rub. also i think you might be a bit off with your 5cm each side of the current tyre as your current tyre will only be 5cm wide so you are saying that you have the same size gap on each side of your tyre as the width of your tyre.

and i just measured up a 2009 altitude and it would come pretty close to scrubbing both sides.

but why do you want such fat tyres? they will make you roll much slower than what you currently have. if you are only riding on the road look at either the ones rowan linked or something like the michelin XC or XCR road tyres (pretty much the same as the maxxis ones rowan linked) or the new michelin city if you want something a bit wider in a slick. or look at some of the touring tyres from conti.

i was just estimating with the 5cm, i havnt had the chance to ride my bike in ages

i wanted them because my mate had them on his 06 GT Chucker 2.0 and they were heaps good,

last really long, we were like going flat out, locking on the rears and doin 20 metre fishies and the tyre would barely loose any rubber. My tyres on the other hand last about 10 good skids before i pop them, which sucks.

But its not all about skids

the main thing is the wear factor

i want it to take the abuse that i dish out (on road, off road, tricks, skids)

but still last for a while

ill have a look at both of them next time i go down to the bike shop

Edited by Mr Holden

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...