Jump to content
SAU Community

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

well - that's obviously taking things too far - but i have a few questions

in perth - there are "bike/bus" lanes, which buses and cycles share - in sydney, where do bikes go? general roads are too dangerous half the time and cyclists run the risk of dieing or being cleaned up, footpaths are dangerous too because pedestrians go on them,. so where are cyclists supposed to go??

i've had my share of close calls with motorists who feel the need to do "whatever it takes" to overtake me (even if it means putting lives at risk) just to pass me - they don't factor in that i'm doing a similar speed to them.. and i admit there have been times i've nearly been hit that i completely lose my temper - i've been known to smack a window or two in my time, or scream at the odd driver that cuts me off so they can pull into chicken treat that 5 seconds earlier... physical violence is TOO FAR of course...

but the way the journalist has portrayed cyclists in that article is laughable - cyclists illegally using the transit lanes? where ELSE do cyclists go?

i was under the impression cyclists were allowed in translit lanes in qld too

i love that they are putting up "61 no bicycle" signs hahah

should bikes used on the road have rego?

have i just started a debate? or brought up old discussion

i was under the impression cyclists were allowed in translit lanes in qld too

i love that they are putting up "61 no bicycle" signs hahah

should bikes used on the road have rego?

have i just started a debate? or brought up old discussion

Thats a piss weak argument considering bikes would need centuries of use on a road to do the damage cars would do in a day.

After all, registration costs are to maintain the roads in a user pays system, and I dont see any space in current cities (sydney) for a dedicated user pays cyclist lane, so you can't really introduce new infrastructure for them

i wasnt refering as much to cyclists paying, more that they would be able identified - as this seems the drama in the article

i agree they should be allowed in the transit lanes - far better than on the line between the transit lane and the far left hand "non transit" lane (if you get me

yeah - why should a cyclist pay registration fees?

no pollution, no road damage, no parking spaces, also - cycles don't hit people or crash into people and kill them...

during the 1990's i remember there was so much publicity and media promotion for people to ride bikes in australia, "look left, look right, look BIKE" (remember that?)

or

"burn fat - not oil"

etc etc

or 'give way to cyclists"

there used to be a lot of government propaganda about how you need to be cyclist aware on the roads - this has dissipated (sp) over the last 5-10 years, as a result, motorists are more vigilant, ignorant, and selfish on the shared roads.

you may not notice it - and this may not be the case over east, but in front of the line of every traffic light, there are 5 diamonds and a picture of a bike painted on the road, this denotes that area is to be left vacant for if there is a cyclist present, so that the cyclist can be noticed and thus not run over as cars jock for lane changes and traffic light races.

it's a dangerous world out there for cyclists... not to mention idiot teenage minded guys who throw maccas cups at you or swear at you as they drive past you... which - is obviously frightening, last thing you need when you're pedalling in a field of ignorant drivers is to be startled or have your concentration comprimised.

it also upsets me when (these are the most common for this attitude) female drivers openly express their views in conversation that when ever they se a cyclist on the road they "drive right up their arse and toot the horn - they have no right to be on my roads" (actual quote - one of many)

bikes have every right to be on the road - it's a legal requirement, it's just not advertised so people think they have the right to play judge jury and executioner because "we pay registration fees and you don't"

the attitudes of motorists needs to be shaken up. but it will take government awareness to acheive this

i can see some valid points in registration for bikes for identification reasons. but a user pays system would cripple the bike industry. and there are too many holes in the idea. what happens if you happen to feel like dusting the bike off for the first time in years to ride down to the shops but haven't got any registration? do you run the risk of getting booked or do you get registration even though you never ride the bike just in case you one day in 5 years time may decide to ride your bike. and what about kids? do they need it as well? and who has to do all the paperwork? do bikeshops have to sort it all out when they sell a bike or does the customer do it themselves once they have bought the bike? and if the customer does it, can they ride straight away, or do they have to wait until it turns up? and what sort of identification do you use? number plates? they would have to be plastic or there would be injuries when people crashed.

as for a user pays system, that would result in a massive decline in cyclists having the following negative effects:

more polution

more traffic on the roads

more crowded public transport

more fat people, which puts more strain on the public health system in both financial terms and waiting list times

higher unemployment due to lots of jobs lost from the bike industry.

as for the argument that cyclists should pay because of all the cycle paths being put in around the cities, well that is just stupid. how many pedestrians do you see using them? plenty. probably just as many pedestrians as cyclists. if you are going to make cyclists pay on that basis, then pedestrians should be charged a registration to pay for footpaths, and the painting of crossings on the road, etc.

How about this bike. Seems to be of good value from aldi - tempted to get one - seems to have all the right bits for the money spent. The local aldo is not selling it for $249 but for $209 instead.

http://www.aldi.com.au/au/html/offers/2827_6093.htm

How about this bike. Seems to be of good value from aldi - tempted to get one - seems to have all the right bits for the money spent. The local aldo is not selling it for $249 but for $209 instead.

http://www.aldi.com.au/au/html/offers/2827_6093.htm

oh dear son of rajab....... *facepalm

the ONLY thing on that bike that is any good is the rear derailleur. the rest of the bike is shit. the forks are cheap shit. the brakes are cheap shit and won't work very well, the frame is cheap shit alloy and will weigh more than a steel frame, the shifters are cheap shit non shimano items and will start to seize up after a few rides, the wheels are cheap shit and if you ride it often you will be lucky to get 6 months out of them before the hubs collapse, and finally it is a dual suspension, so that makes it even heavier and you will very quickly get sick of the bike 'bobbing' up and down every time you pedal.

oh dear son of rajab....... *facepalm

the ONLY thing on that bike that is any good is the rear derailleur. the rest of the bike is shit. the forks are cheap shit. the brakes are cheap shit and won't work very well, the frame is cheap shit alloy and will weigh more than a steel frame, the shifters are cheap shit non shimano items and will start to seize up after a few rides, the wheels are cheap shit and if you ride it often you will be lucky to get 6 months out of them before the hubs collapse, and finally it is a dual suspension, so that makes it even heavier and you will very quickly get sick of the bike 'bobbing' up and down every time you pedal.

Thanks for the info :(

as for the argument that cyclists should pay because of all the cycle paths being put in around the cities, well that is just stupid. how many pedestrians do you see using them? plenty. probably just as many pedestrians as cyclists. if you are going to make cyclists pay on that basis, then pedestrians should be charged a registration to pay for footpaths, and the painting of crossings on the road, etc.

+1

Given the R-tarded nature of our politians & their revenue raising laws .. its a possibility.. They think cyclists pose a danger to pedestrians...Also once you consider they are trying to seperate the 2 means of transport, in a risk assessment pov, possibly they will do it, why do u think they moved cyclists from footpaths to the road. (which is clearly more dangerous). this then provides the grounds nessesary to indentify cycles as 'Vehicles' of transport that can be targeted for more revenue raising.. :??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...