Jump to content
SAU Community

Recommended Posts

hmm, okay then i shall not ever get a fixie.

tsk, i need crank recommendations... my shitmano xt wouldn't stay on anymore. Or does anyone still have those old isis truvativ holzfeller cranks lying around in their garage willing to sell? I loved how those cranks were.

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

hmm, okay then i shall not ever get a fixie.

tsk, i need crank recommendations... my shitmano xt wouldn't stay on anymore. Or does anyone still have those old isis truvativ holzfeller cranks lying around in their garage willing to sell? I loved how those cranks were.

i am assuming you have octalink cranks at the moment and not old XT that is square taper? also what gearing are you running? triple, double or single? also shimano octalink and isis drive spindles are different so you can't just swap the cranks over.

i am assuming you have octalink cranks at the moment and not old XT that is square taper? also what gearing are you running? triple, double or single? also shimano octalink and isis drive spindles are different so you can't just swap the cranks over.

I know, i'm actually using the Hollowtech II cranks.

And i'm running on my granny ring.. 26t, and running a 13 or 15t cog a the back.. its currently now a 13t becaue i cbf adding a link back onto my chain.

so you are only running it as a sinlge speed? why not change to a set of bmx cranks? much stronger. i may be able to hook you up with a set of old cranks and a 25t sprocket. all you would need to do is buy a bearing set for about $50

ok, had a quick look at what i have in old stuff. got 1 set of bmx cranks but not really ideal as they have a 22mm spindle so since you are running it with a euro BB set it will destroy bearings pretty quick. the downside to running a bmx crank is that you can't keep the external bb shell which gives you better bearing life. but going to a bmx crank you are getting a much stronger crank and the weight difference isn't that much. if you are worried about it you could always put a titanium spindle in it. and bmx cranks are cheaper than mtb cranks. i looked up the price of a set of xt cranks before and the wholesale price on them is about the retail price on a good set of bmx cranks. and then once you take into account the cost of a sprocket and bb set the bmx cranks would still be cheaper and stronger.

i'm not a big fan of profile cranks. sure they are good, but there is other stuff just as good, if not better at the same price. i'd be going something like the colony colonial cranks.

as for fitting them. it's not harder than fitting shimano cranks really. you install one side of the bearings, slide the spindle through a bit, slide in the spacer then install the second bearing cup, then just plap around with the spacers until you get the right chainline and the right amount of spacers to have the second arm sit properly and have both arms clear the frame.

I've been racing Downhill for a fair while now.

Heres some of my current rides:

Banshee 2006 Chaparral - Custom race bike. Insured for $7k

16469_181224721187_663326187_3112963_5692023_n.jpg

Skate park/ Jump bike

2008 Eastern Thunderbird

16469_181225001187_663326187_3112964_2972408_n.jpg

Me in action:

State Champs Eagle On The Hill 2009

7335_143487346187_663326187_2799675_3840847_n.jpg

Nationals Eagle On The Hill 2008

n663326187_1109651_9124.jpg

Nationals Eagle On The Hill 2008

n663326187_1055553_2155.jpg

Mt Torrens 2008

n663326187_1015671_2235.jpg

Mt Torrens 2008

n663326187_1015670_1842.jpg

I've been racing Downhill for a fair while now.

Heres some of my current rides:

Banshee 2006 Chaparral - Custom race bike. Insured for $7k

16469_181224721187_663326187_3112963_5692023_n.jpg

Skate park/ Jump bike

2008 Eastern Thunderbird

16469_181225001187_663326187_3112964_2972408_n.jpg

Me in action:

State Champs Eagle On The Hill 2009

7335_143487346187_663326187_2799675_3840847_n.jpg

Nationals Eagle On The Hill 2008

n663326187_1109651_9124.jpg

Nationals Eagle On The Hill 2008

n663326187_1055553_2155.jpg

Mt Torrens 2008

n663326187_1015671_2235.jpg

Mt Torrens 2008

n663326187_1015670_1842.jpg

Question, Have you ever landed a jump so hard that you've snapped your bike frame? or any other bike part for that matter?

I want a Cannondale Capo... $1750 one, the one with the Purple grips on the handle bars... MREPS put it up, where is santa when you most need him?

macdog - that bike is not worth $1750. if a shop is quoting $1750 for that bike you're describing they're having a lend of you.

it's worth $1,100 MAX.

it's a 2009 bike, it's clearance now.

anyway

results of my 53km bikerace. i am a retard.

the night before i decided to fully degrease and dry out my entire bike chain,. then re-lube it.

at the start line i noticed my back wheel wasn't sitting right - lube had got into the axle and slid one side of the wheel over. race started - by brakes were scrubbing the back wheel. had to pull over and re-adjust my brakes, this did nothing. so i hit the wheel back to somewhat straight.sliding the other side of the wheel over - causing chain sag..

chain sag and over lubed chain means chain comes off easilly.. so i lost about 5 mins pulled over with my brakes. chain came off 5 times... and i had to ride a bit slower so as not to hav the chain demount.. so in total i would've lost about 20 mins of my possible time - but - that's riding what can ya do

i finished in the 25th percentile of riders with an average speed of 28.9 km/h

very dissappointed witht he overall goings on ie - bike breaking down majorly.. but.. givent he circumstances.. to finish in the top quarter of riders i really can't complain..

EDIT - looks at BIT_SUSS's rides... my money's on NO. haha

Edited by Mr Eps
Are there any bikes with gears that would suite a 6 yr old ?

I road cycle and want my son to get into it, as he loves riding his little bmx.

But with no gears getting up hills is too hard for him.

you can get 20" mtb's that have 6 or 7 gears. whatever you do don't get a 20" with a triple chainring crankset. they don't have long enough chain stays to properly run a triple chainring set so you end up with plenty of chain issues.

you can also get 24" road bikes, but he wouldn't be big enough to ride one at 6. he would only just fit onto a 20" mtb at 6 unless he is very tall.

Then i'll kill my knees!

nah they are no worse than mtb's for knee injury. and gearing is moderate. not too easy but not too hard. i have crappy knees and i had no issues racing my 20". but you could always go a 24" if you are worried about it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...