Jump to content
SAU Community

Recommended Posts

Another very good one on the market is the AEM, im selling them around $100us cheaper than the innovate or PLX, sure there must be somone in Ausi selling them?

VEMS is also pretty good, not sure if you guys have VEMS agents there though, currently the AEM is slightly cheaper though.

yeah ive been using a aem gauge for nearly a year now, been perfect from day 1.

got it from quantum racing in qld

its got two..... and has full POWERFC support.

i use the LM1 for street tuning and in the race car and the LC1 for other things.

I use the LM1 connected directly to emanage or FC-datalogits for accurate wide band logging.

sorry must have been mistaken with another one.

whats the LC-1/LM-1 worth anyway?

  • 3 weeks later...

Innovate LC1 is the best option if you want to leave the sensor hard wired into your dump pipe. If you are just using it here and there, the LM1 (or its successor, the LM2), is the better option. The LC1 can be had for $260 - http://www.ausperformance.com.au/store/ind...mp;productId=21

The LM2 is a fair bit more expensive, at $620. Whilst I recommend this unit for people who only want to tune their cars every now and then, it isn't worth the money unless you are tuning other people's car's as well.

This isnt an area id be taking chances on over a few hundred $, esp if your going to be tuning with it. The innovative gear is proven many times over.

for ACCURATE tuning i wouldnt go past the autronic. there is a reason why its 2k.

but i use the ngk one. good for cleaning up the map on the road. if you do get one, make sure it has a 9-20:1 resolution with a linear 0-1v and a 0-5v aux output. as most ecus require this for exact afr targeting.

the ngk one does 9-16:1 :s found that out after i got it lol. but does the job i need it to do :D big red digits and a simple air cal. has never dropped cal once. and is .1afr away from the autronic one. :down:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Would be easier to just run the RB25DET gearbox, all you would need to do is have the tail shaft / prop shaft shortened. S15 uses the rear ABS diff sensor for the dash speedo, so you can skip using the gearbox speed sensor.
    • Was the failed sensor by any chance this one? Did it just fail or start pissing on itself? I ordered one too, for fuel pressure monitoring, and now I am hesitant to put it in, hehe. Where did you find a brand one?
    • You'd be insane, when a brand new 8HP is ~$4k, and all the work to put a 6 in would cost the same as an 8 and the 8 is a completely established swap. If you think that getting a cheap Falcon box is going to make it a cost effective exercise, then you're not accounting for the extra $10-15k that the task will consume.
    • any further information on this? also interested in putting a zf6 in behind a rb30!
    • They're all horrible. X-Trails have had a nasty sounding 4cyl since forever, no matter what engine family it came from. The CVTs only made that worse. Then the whole Renault thing only made every Nissan that was contaminated by them even worse again. The only fun I've had in a X-Trail was having it blown sideways across a frozen Minnesota highway at 90 mph trying to make it to the airport to get out of the frozen hellhole of Hoth. Nearly died. Was great fun.
×
×
  • Create New...