Jump to content
SAU Community

Recommended Posts

words cannot begin to describe how upset I am right now. I’m sure some of you have noted how much I love this car n to have it lifeless in the garage is seriously not good for my health.

I’ll try to keep it constructive here but im just gonna throw in a quick f*#$King sh*t f*ck ok now onto the topic

was running at the track, giving my car what I would call semi race pace abuse revving it to about 6-7 through 1st to 3 about 3 times in a row and braking with the gears. So it was not hot or cooked would have been max 2min probably 1 min of abuse and the car was fully warmed up.

was going good sounded fine till I went to get wheel spin and as I dumped the clutch the car lost all power like instantly. I thought it was stalled but it was still running just didn’t want to go anywhere.

I let go of the accelerator n put it in 1st and it was going but sounded pretty sh*t. it was going a lot slower than usual but it when it got up to 3k then just wouldn’t budge from there just held dead on 3k with my foot flat.

I put it in neutral and it was revving up all the way up higher and sounding okish i could hear some turbo action but still not quite 100% right,

Then when I put it in gear it wouldn’t rev over 3k in 1st or 2nd and was going very slow up to 3k. I also noticed the oil pressure top right dial dropped a lil. I checked the oil when I got home n it was still just a touch under full. note 3k would be where the car begins boosting.

Knowing it was f*cked I drove it like this maybe half a k nursing it back off the track just at lowest possible revs in 2nd then let it idle for a bit while we were listening for where the trouble was coming from. Sounded like front right turbo central ready to claim your wallet Dan.

my dad reckons I’ve blown a the bearing in the turbo

Any thoughts on possible probs? pretty confident those turbs are gone :D just hope the engine is ok i hear you can damage that also driving with blown turbo's.

the guy I bought it off said they were steel wheels so I was under the impression they should have been in reasonable condition however maybe he was just talking sh*t

Also if it is the turbo's what options are there? How much ruffly to rebuild etc?

I dont really give a sh*t about upping the power (used to drive a dato for 5years) n i kinda liked it being stock but I hear Nissan turbs are very expensive (just got quoted 5.5k for R33 GTR N1 turbs) and better 1s can be had for cheaper

Most important thing for me is reliability, second torque I like being able to pull away without really trying in the wrong gear etc so some crazy big turbos are a no

Also changing the turbos I’m guessing is defectable but could they tell the diff at regency if I still use stock piping? I'm sure no patrol car could tell unless they gigantic n chrome

574words was a lot harder getting that many out of the assignments I just wrote.

Edited by Inline 6
Link to comment
https://www.sau.com.au/forums/topic/234656-blown-turbo-lil-help/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

didnt really notice, it wouldnt have been dumping much when we had it idling otherwise i woulda noticed.

yeah was pretty weird it like didnt even seem in the least bit interested in even trying to budge over 3k.

i take it when a turb normally blows u can still rev it up high it just wont get on boost n jus sounds poo?

i noticed the boost guage flowing up n down on the negetive side like norm and getting up to 0 when i was flat footing it at 3k.

Edited by Inline 6
didnt really notice, it wouldnt have been dumping much when we had it idling otherwise i woulda noticed.

yeah was pretty weird it like didnt even seem in the least bit interested in even trying to budge over 3k.

i take it when a turb normally blows u can still rev it up high it just wont get on boost n jus sounds poo?

i noticed the boost guage flowing up n down on the negetive side like norm and getting up to 0 when i was flat footing it at 3k.

Yep you've definately monged the turbo somehow. From the description u werent giving the car much shit (aside from tracking it) and so it'd have taken a lot longer for a steel turbo to get really hot... either a dodgy turbo has just gone or the guy was lying and u only have ceramics....cause if u got ceramics and theyve shattered, the parts of the turbine can end up in the engine...

Ryan from ISC has quoted me $2.6k for two garrett 2760-7's which are a good replacement turbo and can handle a fair amount of boost... good for up to 300kw, maybe a tad more

take it to a mechanic asap to get it on the hoist and pop the turbos out... then you'll know for sure... N1 r32 turbos can be gotten for $1200 for a pair sometimes but I haven't seen any around recently. Best bet is either the garretts or the HKS GT-SS for the price..

yr other option is to get the turbos rebuilt which will cost u up to a grand per turbo...when the turbo blows, it wont come on boost as it needs the intake turbine to spool up and push more air into the engine, which isnt happening by the sounds. Im no expert tho, and u should definately take it to a good mechanic (Like Road & Track, details in sig).

Best of luck with that, its not hard to replace turbos but its expensive. And lets hope u didnt have ceramic turbos and they didnt shatter.

-D

Dan, not fantastic to hear. Definately get those turbos out to have a look at them, youll be able to tell straight away. Just thinking, you haven't cracked or popped off any intake piping at all have you?

Dan, not fantastic to hear. Definately get those turbos out to have a look at them, youll be able to tell straight away. Just thinking, you haven't cracked or popped off any intake piping at all have you?

that could be it, maybe if youre lucky... i popped intake piping and thought i'd blown my turbo! only had to get a new clamp which was good! best of luck!

this happened to me once while thrashing thru the hills. freaked me out a bit as it was only a week after i put a new turbo on. the car was loud as and didnt boost after 3000rpm or there abouts. no turbo spool noise. it would try to make boost then drop off straight away..

u know what it was..

the lil clip for the actuator fell off and the wastegate was stuck open.

so sus that out if u can reach it. check the actuator arm is still connected.

oh and i dont reckon u have blown ur turbo. u would defiantly know. trust me ive done it. right before it happens it will sound like theres air pissing out from somewhere and squiling noise. then u will hear crunch crunch of the blades griding the housing. very obvious. that and a f**k load of oil out ur exhaust.

but like i said. make sure the actuator is working correctly and is connected.

Edited by steveP

Yeah sounds like you have popped off an intercooler hose - my car did the identical thing you have described, and all that had happened was a cooler pipe had come loose and popped its clamp.

A blown turbo will almost always result in shitloads of white smoke coming out your exhaust, or so I have heard.

Yeah sounds like you have popped off an intercooler hose - my car did the identical thing you have described, and all that had happened was a cooler pipe had come loose and popped its clamp.

A blown turbo will almost always result in shitloads of white smoke coming out your exhaust, or so I have heard.

we did see a lil white smoke nothing crazy though, was thinking it may have been from the tiny wheelspin it did do but apparently there was a lil bit coming outa there on the way back. definately no loud crunching from turbo, had the window down slightly n no music on so woulda heard if it did.

just to make it clear its not it wasnt boosting over 3k. the car litrally could not get above 3k revs foot flat and was sitting on the 3k like that was the limiter.

was that what you had nightcrawler?

the rev limiter actually has been upped 500rpm in mine maybe that went wonky hmmmms. good food for thought there guys always count on sau for help :P

im gonna spend some quality time saturday underneath the car im no mechanic but im sure i can spot a hose hanging off.

good you coming up with simple effective fixes luke :P damn modifying addict

Edited by Inline 6

yeah mate same sort of thing - but because I only have 1 afm, the car would stall too when I tried to rev. Just check over your pipework and it will soon be very obvious if you have a leak. And run the car and stick your head inside the engine bay while revving - you will hear it blowing/hissing.

Before you got resetting to ECU get the error codes out of it.

how you get error codes out of it? work shop gota do that?

n sled i thought all gtr's like to run rich to keep you spending all your money on them instead of women and to ensure broke ass people cant afford them or to turn you into 1 :P

grease monkey shit kicker clothes here we come :P

Edited by Inline 6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...