SysLink67 Posted September 13, 2008 Share Posted September 13, 2008 Hey Rob ( RIPS ) just wondering do you many rb26/30 conversion for locals ( NZ ) ? is there a NZ based skyline forum by anychance? Are the hybrids pretty popular over there? Also I forgot to ask if their is a warranty you offer with your engine packages? do you offer help for tuning aspects for those customers that buy just your bottom end only? cheers rob Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4130823 Share on other sites More sharing options...
Swiper the Fox Posted September 13, 2008 Share Posted September 13, 2008 (edited) Some food for thought... My home built low 10 sec engine using mainly stock Nissan components (my old one not the current one) with a synchro gearbox on basic road tyres (Federal 595's) runs faster 1/4 mile times than... A mega dollar full workshop backed R34 GTR with JUN stroker making 800AWKW with a Hollinger sequential gearbox on slicks The times are all in the set-up....not the bottom end! This thread is about using strokers (and which one) or not...to run 9's...is it not? Lets get it back on topic Edited September 13, 2008 by DiRTgarage Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131006 Share on other sites More sharing options...
Bumblebee Posted September 13, 2008 Share Posted September 13, 2008 im with Dirt im gonna try n say hello to the 9's as well.. hopefully sometime soon.. i been reading bout someone wanting to do 9's on stock internals?? lol good luck with that im using hks goodies for mine.. and although its not a stroker.. its not stayin a 2.6... its now a 2.7 thanks to a bigger bore.. Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131027 Share on other sites More sharing options...
wrxkilla Posted September 13, 2008 Share Posted September 13, 2008 I don't care about 9 second 1/4s, I've seen what Mark Jacobsen can do with an RB26. you can do 7s with any of the configs.... and with the right turbo selection you dont need 600awhp to do 10s in a GTR... I'm interested in driveability. I've had the pleasure of driving quite a few different set-ups on the circuit now, all doing sub 65s on the long track at Wanneroo. These include a standard 2.6, Jun 2.7, my HKS 2.8, and an RB30. Each has their strengths and weaknesses. Please feel free to give us your opinion for the circuit what you find better and why? really appreciated it. I am still trying to justify that extra cost of a stroker over a 2.6 when it could get me a dry sump etc..... thanks Michael Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131155 Share on other sites More sharing options...
R.I.P.S NZ Posted September 13, 2008 Share Posted September 13, 2008 The times are all in the set-up....not the bottom end! Amen to that, The bottom end is an air pump, thats it, its what you add to it and how you tune it that will give the results, then you have to put it in a suitable car with suitable running gear and drive the bloody thing right to get good results. I had one "respected tuner" from the UK publicly complain that his car hadn't majicly turned into a 9 second monster when he blew his 600hp RB26 and fitted one of my RB30 bottom ends and did no other changes what so ever, go figure!! Whahhh haha Rob Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131162 Share on other sites More sharing options...
R.I.P.S NZ Posted September 13, 2008 Share Posted September 13, 2008 i been reading bout someone wanting to do 9's on stock internals?? lol good luck with that Don't be too hasty, here's a street GTS4 with totally stock internal RB30 bottom end with a totally stock RB25 N/A head with stock N/A cams and springs etc, stock RB20 cast exhaust manifold, stock gearbox, stock suspension, DOT tyres running 10.2 @ 134. We had to DETUNE it to stop breaking boxes, I'm damn sure with a good box it would have run 9s so it is "possible" its just not many people would go down that route cause even if you did do it, no-one would believe it anyway, lol. Rob Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131168 Share on other sites More sharing options...
SysLink67 Posted September 14, 2008 Share Posted September 14, 2008 Hey Rob ( RIPS ) just wondering do you many rb26/30 conversion for locals ( NZ ) ? is there a NZ based skyline forum by anychance? Are the hybrids pretty popular over there? Also I forgot to ask if their is a warranty you offer with your engine packages? do you offer help for tuning aspects for those customers that buy just your bottom end only? cheers rob Don't be too hasty, here's a street GTS4 with totally stock internal RB30 bottom end with a totally stock RB25 N/A head with stock N/A cams and springs etc, stock RB20 cast exhaust manifold, stock gearbox, stock suspension, DOT tyres running 10.2 @ 134. We had to DETUNE it to stop breaking boxes, I'm damn sure with a good box it would have run 9s so it is "possible" its just not many people would go down that route cause even if you did do it, no-one would believe it anyway, lol. Rob Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131408 Share on other sites More sharing options...
R31Nismoid Posted September 14, 2008 Share Posted September 14, 2008 If the 3 criteria you use (600hp, 10s 1/4 mile, reliable/drivable on the street) is indeed all that you really care about, then a standard RB26 with nitrous is your answer. If you want something that you can use for track work as well, then that's a different matter.I've run an 11.1 with R comps and full interior at the drags, which suggests that there is a 10s pass likely with a bit of preparation. I'm sure Jonn with his similar spec engine to mine also would do this. As would Matt (silver R32) with his RB30/-5 setup. You can get 11.5 with a R32 on stock turbos driven hard. So 10s and 600hp is an easy task You'll easily run a 10 with a bit of prep, not a worry in the world with your setup, should be well into the 10's at that. Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131825 Share on other sites More sharing options...
R.I.P.S NZ Posted September 14, 2008 Share Posted September 14, 2008 Hey Rob ( RIPS )just wondering do you many rb26/30 conversion for locals ( NZ ) ? is there a NZ based skyline forum by anychance? Are the hybrids pretty popular over there? Also I forgot to ask if their is a warranty you offer with your engine packages? do you offer help for tuning aspects for those customers that buy just your bottom end only? cheers rob Yes we do quite a few RB30 repowers for nz customers although quite a large % of our work is for overseas customers. NZ has a forum skylinesdownunder and the 25/30 and 26/30s are very popular here. I have never had a warranty claim and we have a 100% success rate with no failiers of any customer motor ever so its never been an issue. If we supply a bottom end or a motor we really have no control over how it could be installed, setup, tuned or driven/treated so there are too many variables to be able to say you have a warranty as such but I will stand behind my workmanship no problem at all. I'm happy to help within reason if a customer buys a bottom end only. Rob Link to comment https://www.sau.com.au/forums/topic/234669-stroker-kit-of-choice/page/9/#findComment-4131830 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now