Jump to content
SAU Community

Recommended Posts

Chasing some info on RB26 valves, I'm in the process of a solid rebuild after lunching a ceramic turbo. Forged pistons, bearings etc, bottom end is all together.

After a quick look at the head though, the valves have been damaged.

Now, the problem, I've lurked around the internets for hours now, and searched these forums from top to bottom, including all the sponsors, nobody seems to sell valves.

I found one standard set, second hand...

What kind of valves have people used in their rebuilds, and where did you find em?

Link to comment
https://www.sau.com.au/forums/topic/235579-rb26-valves-for-rebuild/
Share on other sites

naprec valves are good and cheap. I don't know who sells them in aus, I bought mine in japan, but I'm sure you can get them here too.

ive heard that the naprec valves run a smaller than standard size stem which could cause possible reliability problems in the long term with big revs..

i assume you've got the 1.5mm oversize..

so how are yours holding together and how long have they been in the car?

Another group buy coming along Andrew? (id be in :P )

F%#$K no! never getting involved in one of them again!!

i spoke to my engine builder today and it looks like i'm going to run with standard valves. tho i may still do springs and retainers.

anyone ever use super tech?

i've just ordered the full supertech catalogue (dual springs & ti retainers, guides & OS valves) from the states for a mates motor i'm building, should arrive in the next few days

prices i got were:

valves full set (1mm SS inlet, 1mm Inconel exhaust) - US$499/set

dual springs & ti retainers - US$459/set

manganese bronze guides - US$120/set

total including shipping in aussie $$'s was $1466.12

make sure the guy installing the oversize valves inserts a new valve seat as the std wont cope with the oversize valve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...