Jump to content
SAU Community

Recommended Posts

those ones in glen iris have been there for about 3 weeks.

can anyone confirm seeing an operator/supervisor near by? because i've been past them at night and they seem deserted

As you can see from the pic I upped, I pulled up in front of the tripod for 5mins to see what would happen. Would have loved to take a kip for 1/2hr, but had to get back to the office. I didn't see anyone approaching and although there were a couple of cars around, no one was in them and the cars didn't look stereotypical of what I thought they might. ie new cars.

The car mounted cameras were $80k each and I'm guessing these setups must be worth $40+k, if not more. Therefore I would expect someone to be in close proximity.

I wouldn't be suprised if those camera's auto-snap pics if you get within, say, 3m of it as a self preservation exercise.

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

since the government is all about getting money rather than stopping assaults and burglaries and all that other shit....im thinking of doing a homer simpson, and starting up a "people's police" - think i should look at the law first though before i do that :laugh:

nothing new. I deployed over 5000+ similar units to HK police about 5 years ago which were a handhold unit mounted on a tripod of the car with radar and camera in one unit. This was 5 years ago, so they should be much better now and probably are rolling video with frame capture like most of the newer fixed cameras. no doubt they use a wireless backhaul and leave no images on the unit - thats what i would do.

just don't speed, pretty simple.

once they go into full action no doubt they will be mounted on top of a pole, unless they are going to replace the current car mounted ones which not doubt will still have some one within line of site.

Also as far as i know to get fined by a camera you need to have a detected speed of 8+ over and radar is 6+ over, was told this a while ago and the only person who has been fined below this was a friend who got done doing 6 over by a camera, but there is no guarantee that he wasnt just looking at the alledged speed not the detected speed.

These are black ops speed cameras

http://english.controleradar.org/hidden-speed-camera.php

Note the section on SA speed cameras

Just wait till someone dumps a pail of whatever liquid into the bin and let's see what kind of pictures can those speed cameras take.

i work at a landfill i might talk to some truckies .... get the to use there bin grabber early one morning .. and just pluck it up from the side of the road .. and keep going ... be perfect and no one would know .. in about 4hours after that we would have burried it in like 85tones of more rubbish and building scrap

That's the sh!t, right there.

I love ur evil mind.

Now put ur mind to learning to frive a 6wheel articulated vehicle and not rolling it! :nyaanyaa:

LOL!

once they go into full action no doubt they will be mounted on top of a pole, unless they are going to replace the current car mounted ones which not doubt will still have some one within line of site.

Also as far as i know to get fined by a camera you need to have a detected speed of 8+ over and radar is 6+ over, was told this a while ago and the only person who has been fined below this was a friend who got done doing 6 over by a camera, but there is no guarantee that he wasnt just looking at the alledged speed not the detected speed.

fixed speed is based on a percentage of the limit. I wont tell you what it is, but I know and this hasn't changed for some time.

The point of this device would be mobility, so I doubt they are going on poles.

fixed speed is based on a percentage of the limit. I wont tell you what it is, but I know and this hasn't changed for some time.

The point of this device would be mobility, so I doubt they are going on poles.

They stopped using that a few years ago, it was all over the media at the time because they were bringing in a law that stated you could get done for doing 5k's over in any zone, hence the wipe off 5 campaign, the % use to be 10% but when they brought in the 5k rule there was a huge uproar because by australian standards a new car is allowed to have a speedo that is out by 10%, so you could buy a new car get out on the freeway and be done for speeding within the first 10 minutes of buying a brand new car, there is also a page around that documents a SA minister making public in parliament how much you can go over before being fined in vic.

Who cares if it is 'legit'

I've parked infront of the parked car speed camera's before (was near where i was staying).

Stuff em.

The dude came out and said he was trying to operate a speed detection device and i was in his camera's line which affected it.

I said, ye i know, and asked if i could move it, i said nup. Went inside :thanks:

He also said it took a little while to setup etc

So must have been a pain in the ass :P

I recall you smoke screening one years back too.... Not sure itf all the smoke was coming out the exhaust of the pintara though.....:laugh:

Who cares if it is 'legit'

I've parked infront of the parked car speed camera's before (was near where i was staying).

Stuff em.

The dude came out and said he was trying to operate a speed detection device and i was in his camera's line which affected it.

I said, ye i know, and asked if i could move it, i said nup. Went inside :)

He also said it took a little while to setup etc

So must have been a pain in the ass ;)

That's gold

These are being "tested" around Dandenong at the moment... ...One person/car can operate up to four "devices" at once...

One day last week they were all over the Westal Rd Ext... ...The crazy thing is they can hide them behind crash rails and you don't see them until the last moment...

I saw one of these getting on the freeway from Dynon Rd a couple of nights ago - I go WTF is that?? very sneaky indeed - imagine pulling over and pinching it just for kicks...there would be someone sitting in a car nearby so something like that doesn't happen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...