Jump to content
SAU Community

Recommended Posts

Sunoco...it made 420awkw at 22psi on BP98...we put the Sunoco in and it went backwards to 390 odd kw. Then i adjusted the timing and leaned it off (Sunoco is a slow burning fuel and likes it lean with lots of timing) and power started to climb again. Then once the correct plugs were fitted it really started to make the power it should have. Then a couple more psi of boost until we saw 450kw (600hp) at the treads.

A more experienced tuner may have gotten more power but considering my limited experience it was as far as i was confident of pushing it without hurting it.

Congrats on the figures, have to be happy with that out of a street registered/driven car :)

Interested to know what plugs you were running and what you changed to see the difference???

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Have 2 say a special thanks to paul for all his time in helping me. He knows his shit. As well as glen from esp racing thanx heaps.

Yes its a animal to drive on the road. :happy:

We run vpower plugs

dirt can you post up bp98 tune as well because i want to see comparison of hks t04z with garrett t04z on same fuel

mine made 428rwkw on 24psi (garrett) and another has made 468rwkw on 25psi (garrett). both were standard stroke 2.6l's

is this a 2.6l?

dirt can you post up bp98 tune as well because i want to see comparison of hks t04z with garrett t04z on same fuel

mine made 428rwkw on 24psi (garrett) and another has made 468rwkw on 25psi (garrett). both were standard stroke 2.6l's

is this a 2.6l?

Were they run on the same dyno??

the plugs are NGK v-power coppers

Thats great but you stated "then once the correct plugs were fitted" im assuming you weren't running the v-power plugs at first and just curious as to why???

dirt can you post up bp98 tune as well because i want to see comparison of hks t04z with garrett t04z on same fuel

mine made 428rwkw on 24psi (garrett) and another has made 468rwkw on 25psi (garrett). both were standard stroke 2.6l's

is this a 2.6l?

my hks t04z has gone 585rwhp (440rwkw from my calculation) on 18psi on 98 pump fuel on a very very low reading dyno, another brand new dyno dynamics one i went on recently read 40hp more (520hp to 560hp) on lower boost tune, so i reckon it would of been a bit over 600rwhp on any other dyno.

Thats great but you stated "then once the correct plugs were fitted" im assuming you weren't running the v-power plugs at first and just curious as to why???

Dave still had the platinum street plugs he likes to run on pump in the car

platinum + race fuel = ignition breakdown

what sort of afr's do u tune for on race fuel Paul? and how much extra timing is usually able to be added safely ontop of the pump fuel timing? i dont want the timing numbers (unless u want to post them) just wondering how much extra can be added with race fuel?

what sort of afr's do u tune for on race fuel Paul? and how much extra timing is usually able to be added safely ontop of the pump fuel timing? i dont want the timing numbers (unless u want to post them) just wondering how much extra can be added with race fuel?

for fear of being flamed i care not to publicly post what AFR's and timing. Most people fail to understand how this fuel reacts compared to normal pump. You can run it a lot leaner and give it a lot more timing....more than what you would think. But each engine reacts differently to the increase... so there is no hard and fast rule of thumb. Just got to keep an eye on the exhaust temps and listen carefully to the engine.

if i posted the numbers the uneducated would think id lost my mind...lol

for fear of being flamed i care not to publicly post what AFR's and timing. Most people fail to understand how this fuel reacts compared to normal pump. You can run it a lot leaner and give it a lot more timing....more than what you would think. But each engine reacts differently to the increase... so there is no hard and fast rule of thumb. Just got to keep an eye on the exhaust temps and listen carefully to the engine.

if i posted the numbers the uneducated would think id lost my mind...lol

no worries, what sort of egt's are the safe limit to go up to? i run 6 egt probes (one in each runner) and wondering what the safe limit is temp wise?

no worries, what sort of egt's are the safe limit to go up to? i run 6 egt probes (one in each runner) and wondering what the safe limit is temp wise?

egt probes??

fancy pants :)

we do it by look and feel...lol...those overfuelling backfire flames can be nasty.

So you stick your hand up the exhaust and have a feel, Paul? :)

Nah i was in the car punching the numbers in...i nominated Glen from ESP racing to keep an eye on what was coming out the back. :)

egt probes??

fancy pants :)

we do it by look and feel...lol...those overfuelling backfire flames can be nasty.

yep, overkill maybe :)

when the last engine was destroyed i decided it was worth it, plus a knock detection setup and datalogger setup for afr's and egt's. The last repair kill was $4000 in parts and machine work, something i dont want happening anytime soon.

i tell you what the egt differences between cylinder is rather interesting, definately something worthwhile for pushing the limits of an engine.

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...