Jump to content
SAU Community

Recommended Posts

Just wondering what everyone likes about their RB30DET's.. ive been runnin round in twin cam rb30 brotherhood for around 4 to 5 years now...

I love the gut busting pull (over 1 tonne of torque well 1083nm) , the feeling of being ripped from one side of the road to the other with ease, and how tough they sound as well.

I especially like that i can drive it around off boost and be very very driveable with low compression ratio !!

so fess up ;)

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Still only got a little turbo on mine for now but I came from an RB20 and the difference (same turbo) is chalk and cheese. The abundance of torque is great, being able to drive under 2000rpm and stay with traffic or not having to downshift from 5th to overtake.. fkn awesome, love it and wouldn't go back!

Oh yeah, they sound tough :bunny:

Best upgrage ive made. I had to choose wether to rebuild the 25 or go with the 30. The 30 is so much more drivable with my twin turbo setup. Would have been nice to see how a 5 speed would last with the extra torque :P

25det 5spd? should be fine, I'm not making a heap of power yet but I do beat up on it quite hard and it's holding up fine where the RB20 box died within a couple of months of the 30 going in!

3L TORQUE FTMFW!

I like mine because i built it and it works :)

I also love cruising in 5th at 80 and planting it. even in overdriven gear ratios the torque is a surge like nothing else.

things i dont like...

having to run semi slick 255 tyres to get traction and replacing them every other month :)

I like the fact that I have insane fuel economy... Although that might be because it goes through more engine problems then tanks of fuel... :(

Anyone want to change my BHG?

But, when it is running, even pig rich, the torque, to just cruise in and around easily. Then when I want some real power, plant it, and wait a second or so for boost...

Oh... And only revving to 5000RPM, only 1 bar of boost, running pig rich, no timing, and still able to pull 3rd gear roll on burnouts in the dry with 255 wide rears on...

But it's not fun when only using 1/4 throttle in the wet and having the same issues... :(

  • 2 weeks later...
  • 2 weeks later...

Unsure on the torque mines running in comparison to Guilt-Toys but its making ~160rwkw at 3000rpm 200rwkw at 3500rpm and 256rwkw at 4000rpm then on to 302rwkw @ 17psi @ 6000rpm. Cams really woke it up with regards to the power it made on bugger all boost.

* The forgivingness if you don't want to rev it out; short shift and it just doesn't seem to loose pace or drop off boost.

* Its pull from 60km/h in fourth gear.

* Being able to stick it to rb25 and 26's from 60km/h in third gear when they are nailing second. :)

Most of all how tough the 3ltr sounds. Since the cams went in its super deep and throbs on idle.

Unsure on the torque mines running in comparison to Guilt-Toys but its making ~160rwkw at 3000rpm 200rwkw at 3500rpm and 256rwkw at 4000rpm then on to 302rwkw @ 17psi @ 6000rpm. Cams really woke it up with regards to the power it made on bugger all boost.

* The forgivingness if you don't want to rev it out; short shift and it just doesn't seem to loose pace or drop off boost.

* Its pull from 60km/h in fourth gear.

* Being able to stick it to rb25 and 26's from 60km/h in third gear when they are nailing second. :rofl:

Most of all how tough the 3ltr sounds. Since the cams went in its super deep and throbs on idle.

Can I ask, what cam size did you end up going with?

265/263 8.9mm Tighe Regrinds. 221degree's at 0.050" - Cost me $330.

I was a little sceptical of the 265duration but Shaun/Boostworx insisted they work well in the rb30.

Fuel economy is great - A little over 11L/100.

No noticeable loss down low even though the dyno shows 2-3 kw. Once over 2k the cams start making more power compared to stock.

On the road low gear spool improved noticably. It appears to rev up and spool the turbo a tad quicker at light load (i.e low gear).

265/263 8.9mm Tighe Regrinds. 221degree's at 0.050" - Cost me $330.

I was a little sceptical of the 265duration but Shaun/Boostworx insisted they work well in the rb30.

Fuel economy is great - A little over 11L/100.

No noticeable loss down low even though the dyno shows 2-3 kw. Once over 2k the cams start making more power compared to stock.

On the road low gear spool improved noticably. It appears to rev up and spool the turbo a tad quicker at light load (i.e low gear).

So you just had your stock Cams reground? Or you bought whole new cams, already done?

I really want some new cams, as big as I can go, and for my head, it looks like a 272 with 9.25mm lift is as large as I can get in there... My biggest issue in finding cams is finding ones to match an RB20... ;)

That's $330 per cam? or $330 total?

about to build mine!

arias forged pistons

spool conrods

n1 oil pump

metal head gasket

and all the usual stuff!

mine is auto so might have to mod gearbox at some stage!have highflow turbo on mine at the moment,rated at 260kw at the wheels!will hope to get around 340hp at the wheels and if not happy with power then will go for slightly bigger turbs!bottom should be rated at around 550hp at the wheels!being auto,the torque down low should be awesome! ;)

Lol mine isnt going yet either so at the moment my favourite thing is bragging rights to my other mate rebuilding his 25 :rant: . Secondly is the anticipation of getting it goin cos of all the stories about lighting up the rears in 3rd in fourth etc. Cant wait!!

Lol mine isnt going yet either so at the moment my favourite thing is bragging rights to my other mate rebuilding his 25 :cheers: . Secondly is the anticipation of getting it goin cos of all the stories about lighting up the rears in 3rd in fourth etc. Cant wait!!

I don't like the fact that mine will bag 3rd gear with 1/4 throttle in the wet... Makes it f**king pathetic attempting to overtake or anything...

And that's 3rd gear, doing 80km/h, go to accel and it steps sideways...

And at the cost of rubber on the rear... You cringe very quickly... :)

Need a bigger turbo. :cheers:

I find the GT30 to be really tractable. Part throttle the boost moves up with more throttle i give it. Its easy to have it just hanging on the limit so to speak.

If I don't feel like playing with the throttle - 80km/h in fourth still pulls plenty hard and will start to break traction at around 110km/h with half throttle in the wet :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...